British EN1090-2 Europe Standard Registered Structural Steelworks Fabricator Steel structure is a structure composed of steel materials, which is one of the main types of building structures. The structure is mainly composed of beams, steel columns, steel trusses and other components made of profiled steel and steel plates. It adopts silanization, pure manganese phosphating, washing and drying, galvanizing and other rust removal and rust prevention processes. Components or parts are usually connected by welding, bolts or rivets. Because of its light weight and easy construction, it is widely used in large-scale factory buildings, stadiums, and super high-rise areas. Steel structures are susceptible to corrosion. Generally, steel structures need to be derusted, galvanized or painted, and regularly maintained.   Steel is characterized by high strength, light weight, good overall rigidity, and strong resistance to deformation. Therefore, it is particularly suitable for the construction of large-span, ultra-high, and super-heavy buildings; the material has good homogeneity and isotropy, which is ideal elasticity Material, which best meets the basic assumptions of general engineering mechanics; the material has good plasticity and toughness, can have large deformation, and can withstand dynamic loads well; the construction period is short; it has a high degree of industrialization, and can be specialized in production with a high degree of mechanization.   For steel structures, high-strength steels should be studied to greatly increase their yield point strength. In addition, new types of steels, such as H-shaped steel (also known as wide-flange steel) and T-shaped steel, as well as profiled steel plates, are rolled to adapt to large-span structures and The need for super high-rise buildings.   In addition, there is a heat-resistant bridge light steel structure system. The building itself is not energy-efficient. This technology uses clever special connectors to solve the problem of cold and hot bridges in the building. The small truss structure allows cables and water pipes to pass through the wall for construction. Decoration is convenient.   Advantage: The steel component system has the comprehensive advantages of light weight, factory-made manufacturing, fast installation, short construction cycle, good seismic performance, fast investment recovery, and less environmental pollution. Compared with reinforced concrete structures, it has more The unique advantages of the three aspects of development, in the global scope, especially in developed countries and regions, steel components have been reasonably and widely used in the field of construction engineering.   Carrying capacity: Practice has shown that the greater the force, the greater the deformation of the steel member. However, when the force is too large, the steel members will fracture or severe and significant plastic deformation, which will affect the normal work of the engineering structure. In order to ensure the normal working of engineering materials and structures under load, it is required that each steel member should have sufficient load-bearing capacity, also known as bearing capacity. The bearing capacity is mainly measured by the sufficient strength, stiffness and stability of the steel member.   Sufficient strength Strength refers to the ability of a steel component to resist damage (fracture or permanent deformation). That is to say, no yield failure or fracture failure occurs under the load, and the ability to work safely and reliably is guaranteed. Strength is a basic requirement that all load-bearing members must meet, so it is also the focus of learning.   Sufficient stiffness Stiffness refers to the ability of a steel member to resist deformation. If the steel member undergoes excessive deformation after being stressed, it will not work properly even if it has not been damaged. Therefore, the steel member must have sufficient stiffness, that is, no stiffness failure is allowed. Stiffness requirements are different for different types of components, and relevant standards and specifications should be consulted when applying.   Stability Stability refers to the ability of a steel component to maintain its original equilibrium form (state) under the action of an external force. The loss of stability is the phenomenon that the steel member suddenly changes the original equilibrium form when the pressure increases to a certain degree, which is referred to as instability. Some compressed thin-walled members may also suddenly change their original equilibrium form and become unstable. Therefore, these steel components should be required to have the ability to maintain their original equilibrium form, that is, have sufficient stability to ensure that they will not be unstable and damaged under the specified conditions of use. The instability of the pressure bar generally occurs suddenly and is very destructive, so the pressure bar must have sufficient stability. In summary, in order to ensure the safe and reliable working of steel members, members must have sufficient bearing capacity, that is, have sufficient strength, stiffness and stability, which are the three basic requirements for ensuring the safe work of components.   Metal fabrication is the creation of metal structures by cutting, bending, and assembling processes. It is a value-added process involving the creation of machines, parts, and structures from various raw materials.   Metal fabrication usually starts with drawings with precise dimensions and specifications. Fabrication shops are employed by contractors, OEMs and VARs. Typical projects include loose parts, structural frames for buildings and heavy equipment, and stairs and hand railings.   Specification: 1 Main steel structure H section steel structure 2 Steel surface treatment painting or galvanized 3 Bracing angle steel, belt bar, steel bar, etc. 4 Wall and roof panel EPS, rock wool, fiber glass, PU sandwich panel or one layer corrugated steel plate 5 Bolts anchor bolts, intensive bolts, commen bolts 6 Purlin C section, Z section purlin in different size 7 Edge cover Made of color steel plate 8 Gutter and down pipe Gutter made of color steel plate or galvanization plate, PVC down pipe 9 Crane Crane to lift 2 ton to 10 ton 10 Door Sliding door, rolling door, lift door, etc. 11 Window PVC window, aluminium window, steel window, etc. 12 Accessories Nails, sealing glue, gasket, etc.   The Quality of Structural Steel There are many different choices when it comes to structural steel. The lower the carbon content in the steel that is chosen determines the ease of welding. Lower carbon content equals a faster rate of production on construction projects, but it can also make the material more difficult to work with. FAMOUS is able to offer structural steel solutions that are both efficiently made and highly effective. We will work for you to determine the perfect type of structural steel for your project. The processes used to design structural steel can change the cost. However, structural steel is a cost effective material when used properly. Steel is an excellent, highly-sustainable material, but it is far more effective in the hands of experienced and well-educated engineers who understand its properties and potential benefits. Overall, steel holds a huge number of advantages to contractors and others who intended to utilize it for industrial applications. Experts have found that even reinforcing older buildings with new welding processes can significantly improve the strength of the building. Imagine the benefits of using expertly welded structural steel from the start for you construction project. Then contact FAMOUS for all of your structural steel welding and fabrication needs.

Europe USA Standard Corten Steel Plate Made Paint Free Structural Steel Bridge For Weather Resistance Weather-resistant structural steel is atmospheric corrosion-resistant steel, which belongs to low-alloy high-strength structural steel. According to its main characteristics, it is divided into high weather-resistant structural steel and weather-resistant steel for welded structure. Weathering steel is a series of low-alloy steel between ordinary steel and stainless steel, and a series of low-alloy steel between ordinary steel and stainless steel, with low cost and good quality. Classification: 1. High weathering steel High weather resistance structural steel is to add a small amount of copper, phosphorus, chromium, and nickel elements to the steel to form a protective layer on the surface of the metal collective to improve the performance of the steel against atmospheric corrosion. You can also add a small amount of molybdenum, niobium, Elements such as vanadium, titanium and zirconium can refine the grains, improve the mechanical properties of steel, improve the strength and toughness of steel, reduce the brittle transition temperature, and make it have better resistance to brittle fracture. 2. Weathering steel for welding structure The elements added to the steel grade, except for phosphorus, are basically the same as high weather resistance structural steels, and their functions are the same and improve welding performance. Features: Weathering steel has the characteristics of toughness, plastic stretching, forming, welding and cutting, wear resistance, high temperature resistance and fatigue resistance of high-quality steel; weather resistance is 2-8 times that of ordinary carbon steel, and the coating performance is 1.5 of ordinary carbon steel. -10 times, the coating performance is 1.5-10 times that of ordinary carbon steel, can be used for thin coating, bare coating or simplified coating. This steel has the characteristics of anti-rust, corrosion resistance, extended life, thinning and consumption reduction, labor-saving and energy-saving, which benefits component manufacturers and users. Weathering steel has better corrosion resistance in the atmosphere. Weathering steel can be thinned, exposed or simply painted. The steel system with corrosion resistance, life extension, labor saving, consumption reduction and upgrade is also a new mechanism, new technology and new process that can be integrated into modern metallurgy, so that it can continue to develop and innovate. Steel system. Advantages: Weathering steel is made of ordinary carbon steel with a small amount of corrosion-resistant elements such as copper and nickel. It has the characteristics of steel strength, ductility, forming, welding, abrasion, high temperature, fatigue, etc.; weather resistance is 2~8 of ordinary carbon steel The coating performance is 1.5~10 times that of ordinary carbon steel, which can be used in thinner, bare or simplified coating. The steel has the characteristics of rust resistance, corrosion resistance and longevity of components, thinning and consumption reduction, and labor-saving and energy-saving characteristics, which benefit component manufacturers and users. Application: The use of high weather resistance structural steel is better than weather resistance steel for welded structure because of its atmospheric corrosion resistance. It is mainly used for bolting, riveting and welding structural parts for vehicles, containers, buildings, towers and other structures. When used as welded structural parts, the thickness of the steel should not be greater than 16mm. The welding performance of weathering steel for welded structure is better than that of high weathering steel, and it is mainly used for welded structural parts for bridges, buildings and other structures.

Q355NHD Weather Resistance Steel Plate Assembled Steel Structure Truss Bridge Main Girder Weather-resistant structural steel is atmospheric corrosion-resistant steel, which belongs to low-alloy high-strength structural steel. According to its main characteristics, it is divided into high weather-resistant structural steel and weather-resistant steel for welded structure. Weathering steel is a series of low-alloy steel between ordinary steel and stainless steel, and a series of low-alloy steel between ordinary steel and stainless steel, with low cost and good quality. Classification: 1. High weathering steel High weather resistance structural steel is to add a small amount of copper, phosphorus, chromium, and nickel elements to the steel to form a protective layer on the surface of the metal collective to improve the performance of the steel against atmospheric corrosion. You can also add a small amount of molybdenum, niobium, Elements such as vanadium, titanium and zirconium can refine the grains, improve the mechanical properties of steel, improve the strength and toughness of steel, reduce the brittle transition temperature, and make it have better resistance to brittle fracture. 2. Weathering steel for welding structure The elements added to the steel grade, except for phosphorus, are basically the same as high weather resistance structural steels, and their functions are the same and improve welding performance. Features: Weathering steel has the characteristics of toughness, plastic stretching, forming, welding and cutting, wear resistance, high temperature resistance and fatigue resistance of high-quality steel; weather resistance is 2-8 times that of ordinary carbon steel, and the coating performance is 1.5 of ordinary carbon steel. -10 times, the coating performance is 1.5-10 times that of ordinary carbon steel, can be used for thin coating, bare coating or simplified coating. This steel has the characteristics of anti-rust, corrosion resistance, extended life, thinning and consumption reduction, labor-saving and energy-saving, which benefits component manufacturers and users. Weathering steel has better corrosion resistance in the atmosphere. Weathering steel can be thinned, exposed or simply painted. The steel system with corrosion resistance, life extension, labor saving, consumption reduction and upgrade is also a new mechanism, new technology and new process that can be integrated into modern metallurgy, so that it can continue to develop and innovate. Steel system. Advantages: Weathering steel is made of ordinary carbon steel with a small amount of corrosion-resistant elements such as copper and nickel. It has the characteristics of steel strength, ductility, forming, welding, abrasion, high temperature, fatigue, etc.; weather resistance is 2~8 of ordinary carbon steel The coating performance is 1.5~10 times that of ordinary carbon steel, which can be used in thinner, bare or simplified coating. The steel has the characteristics of rust resistance, corrosion resistance and longevity of components, thinning and consumption reduction, and labor-saving and energy-saving characteristics, which benefit component manufacturers and users. Application: The use of high weather resistance structural steel is better than weather resistance steel for welded structure because of its atmospheric corrosion resistance. It is mainly used for bolting, riveting and welding structural parts for vehicles, containers, buildings, towers and other structures. When used as welded structural parts, the thickness of the steel should not be greater than 16mm. The welding performance of weathering steel for welded structure is better than that of high weathering steel, and it is mainly used for welded structural parts for bridges, buildings and other structures.

Custom Tension Fabric Structural Carport Menbrane Stadium Airport US-EU Australia Standard Membrane structure is a structural system that combines building and structure. It uses high-strength flexible film materials and auxiliary structures to generate a certain pre-tensioning stress inside in a certain way, and form a certain spatial shape under stress control as a covering structure Or the main body of the building, and has enough rigidity to resist the action of external load, a narrow structure type.   Membrane structure is a new type of architectural structure developed in the middle of the 20th century. It breaks the model of pure linear architectural style. With its unique beautiful curved shape, the combination of simplicity, liveliness, rigidity and softness, strength and beauty gives people The refreshing feeling also provides the architect with greater imagination and creative space. Membrane structure has a strong sense of the times and representativeness. It is a multidisciplinary cross-application engineering integrating architecture, structural mechanics, fine chemical engineering, material science, and computer technology. It has high technical content and artistic appeal. Its curved surface It can be changed arbitrarily with the architect's design needs. Combined with the overall environment, a landmark image project has been constructed, with strong practicability and a wide range of applications. It can be applied to large-scale public facilities, such as the roof system of stadiums, airport halls, exhibition centers, shopping centers, parking lots, platform facilities, etc. It can also be applied to leisure facilities, industrial facilities, entrance corridors, landmark or landscape buildings, sketches, etc. Specifications: Item Specification Application Sports area, outdoor shade, permanent tent, swimming pool cover OEM Item Size, color, shape, material are all acceptable. Membrane TypeApplication 100% polyester base fabric, optional PTFE or PVDF ,ETFE coated Support Frame GB Q235 steel or galvanized steel Color Optional, such as white, red, grey, yellow, blue, green, etc. Warranty Under normal circumstances: frame:one year, membrane material:10-20 years OEM case: could be extended according to customer requirements Advantages of Tensile Membrane Structures 1.Flexible Design Aesthetics Virtually unlimited designs of distinctive elegant forms can be realized because of the unique flexible characteristics of architectural membrane. Also, fewer support columns create more functional, aesthetically pleasing spaces. 2.Outstanding Translucenncy In daylight, the membrane's translucency offers soft diffused naturally lit spaces reducing interior lighting costs. At night, the artificial lighting creates an ambient exterior luminescence. 3.Shortened Construction Schedules Incorporating the most modern construction techniques, large fabricated membrane panels can be installed quickly to shorten installation schedules. Likewise, fabric removal can be accomplished easily. 4.Cost Beneifits Lightweight structures can be a more cost effective solution than traditional building materials offering building owners reduced costs. Materials, such as photo-catalytic membranes, can help prevent temperature rise as well as reduce maintenance costs due to their self-cleaning properties. 5.Long Span Structures Lightweight membrane is a cost-effective solution that requires less structural steel to support the roof, enabling long spans of column-free space. 6.Earthquake Resistant Lightweight tensile membrane structures bear less building load than traditional roofing materials and the membrane's elasticity offers further earthquake resistance. Classification: The architectural structure of the membrane structure is colorful and ever-changing. According to the support method, it is divided into an inflatable membrane structure, a tensile membrane structure and a skeleton support membrane structure. 1. Skeleton membrane structure The roof skeleton made of steel structure or integrated material is stretched above the membrane structure, and the lower support structure has high stability. Due to the simple roof shape, the opening is not easy to be restricted, and it has high economic benefits. It is widely applicable For any large and small space. 2. Tensile membrane structure It is composed of membrane material, steel cable and pillar, and uses steel cable and pillar to introduce tension into the membrane material to achieve a stable form. In addition to practicing creative, innovative and beautiful shapes, it is also the most structural form that can demonstrate the spirit of membrane structure. Large-span spaces also mostly use steel cables and compressed materials to form a steel wire mesh to support the upper membrane. Due to high construction accuracy requirements, strong structural performance, and rich expressive power, the construction cost is slightly higher than the skeleton membrane structure. 3. Inflatable membrane structure The inflatable membrane structure is to fix the membrane material around the roof structure. After the indoor air pressure is raised to a certain pressure by the air supply system, the pressure difference between the inside and outside of the roof is generated to resist the external force. Because the air pressure is used for support, and the steel cable is used as an auxiliary material , Without any beam and column support, it can get more space, quick construction and high economic benefit, but it needs to maintain the 24-hour blower operation, which is higher in the cost of continuous operation and machine maintenance costs.

ETFE PTFE Coated Stadium Membrane Structural Steel Fabric Roof Truss Canopies America Europe standard Membrane structure, also called tensile membrane structure, is the most representative architectural form in the 21st century. It breaks the pattern of pure linear architectural style, with its unique beautiful curved surface shape, the perfect combination of conciseness, crispness, rigidity and softness, strength and beauty, and at the same time provides architectural designers with greater imagination and creative space. Specifications: Item Specification Application Sports area, outdoor shade, permanent tent, swimming pool cover OEM Item Size, color, shape, material are all acceptable. Membrane TypeApplication 100% polyester base fabric, optional PTFE or PVDF ,ETFE coated Support Frame GB Q235 steel or galvanized steel Color Optional, such as white, red, grey, yellow, blue, green, etc. Warranty Under normal circumstances: frame:one year, membrane material:10-20 years OEM case: could be extended according to customer requirements Membrane structure is a structural system that combines architecture and structure. It uses high-strength flexible film materials and auxiliary structures to generate certain pre-tension stresses in a certain way and form a certain spatial shape under stress control as a covering structure. Or the main body of the building, and a type of narrow structure with sufficient rigidity to resist external loads. Membrane structure is a new type of building structure developed in the middle of the 20th century. It breaks the pattern of pure linear architectural style. With its unique beautiful curved shape, it is simple, crisp, rigid and soft, and the combination of strength and beauty. Refreshing feeling, while providing architectural designers with greater imagination and creative space. Membrane structure has a strong sense of time and representativeness. It is a multi-disciplinary cross-application project integrating architecture, structural mechanics, fine chemical engineering, material science, and computer technology. It has a high technical content and artistic appeal. Its curved surface Can be arbitrarily changed according to the architect's design needs. Combined with the overall environment, the iconic image project is built, with strong practicability and wide application fields. It can be applied to large public facilities, such as the roof system of stadiums, airport halls, exhibition centers, shopping centers, parking lots, platform facilities, etc. Advantages: (1) Large span. Membrane structure has light weight and good seismic performance, which can eliminate the need for internal support. It overcomes the difficulties encountered by traditional structures on large-span (unsupported) buildings. It can create huge unobstructed visual space and effectively increase the space used. . (2) Artistic. Membrane structure breaks through the traditional architectural structure types, relying on styling and color science, can combine natural conditions, give full play to the architect's imagination, and create curves and various shapes that are difficult to achieve in traditional buildings according to creativity. , Full of the atmosphere of the times, reflecting the beauty of the strength of structural members. With the light, it is easy to form a night scene, giving people the enjoyment of modern beauty. (3) Economical. The film material has a certain light transmittance, which can reduce the intensity and time of lighting during the day and save energy; the transmission of colored lights at night can form a gorgeous landscape. Moreover, the membrane structure can be disassembled and easy to relocate, especially when building large-span buildings for short-term applications, which is more economical. (4) Security. The flame retardant and high temperature resistance of the membrane material can well meet the fire protection requirements; the membrane structure is a flexible structure that can withstand large displacements and is not easy to collapse; the membrane structure has light weight and good seismic performance. (5) Self-cleaning. Membrane materials with protective coating are used in membrane construction, which is not sticky. The dust falling on the surface of the membrane material can be washed by rain to achieve a good self-cleaning effect, while ensuring the service life of the building. (6) The construction period is short. The cutting of the diaphragm, the production of steel cables and steel structures, etc. are all completed at the factory to reduce the construction time on site. It can be carried out simultaneously with the lower reinforced concrete structure or components to avoid construction crossovers. At the construction site, only the steel cables, steel structures and membranes The connection, installation and positioning of the film and the process of tension, so the site construction and installation is fast and fast, and the construction period is relatively short compared to the traditional construction project. (7) Wide application. From the perspective of climatic conditions, membrane structure buildings are suitable for a wide area; from the perspective of scale, they can be as small as a single tent, a garden sketch, or a building covering tens of thousands or hundreds of thousands of square meters. Some people even imagined covering a small city to realize artificial nature. Classification: The architectural structure of the membrane structure is colorful and ever-changing. According to the support method, it is divided into an inflatable membrane structure, a tensile membrane structure and a skeleton support membrane structure. 1. Skeleton membrane structure The roof skeleton made of steel structure or integrated material is stretched above the membrane structure, and the lower support structure has high stability. Due to the simple roof shape, the opening is not easy to be restricted, and it has high economic benefits. It is widely applicable For any large and small space. 2. Tensile membrane structure It is composed of membrane material, steel cable and pillar, and uses steel cable and pillar to introduce tension into the membrane material to achieve a stable form. In addition to practicing creative, innovative and beautiful shapes, it is also the most structural form that can demonstrate the spirit of membrane structure. Large-span spaces also mostly use steel cables and compressed materials to form a steel wire mesh to support the upper membrane. Due to high construction accuracy requirements, strong structural performance, and rich expressive power, the construction cost is slightly higher than the skeleton membrane structure. 3. Inflatable membrane structure The inflatable membrane structure is to fix the membrane material around the roof structure. After the indoor air pressure is raised to a certain pressure by the air supply system, the pressure difference between the inside and outside of the roof is generated to resist the external force. Because the air pressure is used for support, and the steel cable is used as an auxiliary material , Without any beam and column support, it can get more space, quick construction and high economic benefit, but it needs to maintain the 24-hour blower operation, which is higher in the cost of continuous operation and machine maintenance costs.

Multispan Single Lane Prefabricated Bailey Steel Bridge Construction Assembly   Quick detail: 1. Our factory produces 321-type bailey bridge and 200-type bailey bridge. 2. High-end produce with good quality, excellent in workmanship, best service 3. Main Material: Q345B steel   In 2015, our company passed the ISO9001:2000 International Quality Management System Authentication. The company is recommended as the Demonstration of Quality Management by China Quality Observation Station; Safe Production Advanced Unit by the city government, Industrial and Commercial Relief Enterprise by the city Industrial and Commercial Bureau in 2016, Rank A enterprise of Labor Production by the city Labor Bureau in 2016. At the same time, we declare the patent of the technology production and the practical production of Equipped Road Steel Bridge to National Knowledge Property Right Bureau.   Our main production is equipped road steel bridge, that is, Bailey Bridge. We adopt the Road Bridge Construction Technical Rules(JTL041200) By the Ministry of Communications to process, and make the steel bridge, which is simply-structured, conveniently-transported, strongly-suited, well-exchanged, rapid erection, and huge load. It is widely used in national defense equipment, flood fighting, transportation, irrigation works, railway and so on. We also specialize in producing the derivative product of bailey bridge, such as panel pin, female end post, male end post, bridge seat, base-plate, reinforced chord, clip and so on.   Specifications Type Single Lane/Double Lane/Special-made Lane Material Q345B steel Bridge Type 321-type bailey bridge or 200-type bailey bridge Corrosion Original Painted or Hot Dip Galvanized Standard GB/BS/AS/EN/ANSI/JIS Color Army Green/Light Gray Loading capacity Design according to different requirements   Service: Pre-sale service: 1. We provide pre-sale service in various forms, for example, making investment budget, manufacturing, planning so that customers can make a reasonable plan with less cost. 2. Offer information of peripherals In-sale service: 1. We design the structure of the bridge after the customer telling us the specifications. 2. Technological information of provided bridges 3. Schedule about design, manufacturing and assembly 4. Working&producing progression 5.Training course for the technician so that the assembly is safe and standard. After-sale service: 1. For customers buying our products, we provide them free training so that they can assemble, use and maintain the bridge independently. 2. We will answer customer’s questions on technology in time. If needed, we will offer on-site guidance and assist. 3.We will provide installation manual, operation manual and maintenance manual for customers.   Advantage: 1. With a couple of years specializing in producing bailey bridges 2. Strong enterprise innovation, with groups of professional engineers and salesmen 3. Our high quality but low prices have gained market and public praise from domestic and abroad. 4.We have very good and comprehensive after-sales service.   Application: · Road Bridges · Pedestrian Bridges · Railway Bridges · Steel Truss Bridge · Beam Bridges · Steel Bailey bridge · Structural Steel Box Bridge   · Highway Bridges · Composite Beam Bridge · Cable-Stayed Bridge · Floating Bridge etc.   Our experienced team is focused on your steel bridge project's success, from start to finish. Our proven ability to identify and overcome design inconsistencies, potential problems with erection, and shipping obstacles results in the fabrication of structural steel that is right the first time, helping you avoid costly construction delays.   Our company undertook the construction of national key projects from China Railway Bridge Bureau, China Tunnel Traffic and China Railway Shanghai Bureau. Because of the good quality, our productions are exposed to more than ten African and Asian countries, such as Laos, Angola, Bangladesh and Myanmar, so we are widely received by the international markets.   FASEC Buildings will take "integrity, harmony and high efficiency" as the core spirit, advance with the times, leapfrog development, and strive to make greater contributions to the steel bridge industry! We are willing to create a better tomorrow with you!

Hot Galvanized Double Lane Pre - Engineered Bailey Bridge Construction Steel 200 Type   Quick detail: 1. Our factory produces 321-type bailey bridge and 200-type bailey bridge. 2. High-end produce with good quality, excellent in workmanship, best service 3. Main Material: Q345B steel   In 2015, our company passed the ISO9001:2000 International Quality Management System Authentication. The company is recommended as the Demonstration of Quality Management by China Quality Observation Station; Safe Production Advanced Unit by the city government, Industrial and Commercial Relief Enterprise by the city Industrial and Commercial Bureau in 2016, Rank A enterprise of Labor Production by the city Labor Bureau in 2016. At the same time, we declare the patent of the technology production and the practical production of Equipped Road Steel Bridge to National Knowledge Property Right Bureau.   Our main production is equipped road steel bridge, that is, Bailey Bridge. We adopt the Road Bridge Construction Technical Rules(JTL041200) By the Ministry of Communications to process, and make the steel bridge, which is simply-structured, conveniently-transported, strongly-suited, well-exchanged, rapid erection, and huge load. It is widely used in national defense equipment, flood fighting, transportation, irrigation works, railway and so on. We also specialize in producing the derivative product of bailey bridge, such as panel pin, female end post, male end post, bridge seat, base-plate, reinforced chord, clip and so on.   Specifications Type Single Lane/Double Lane/Special-made Lane Material Q345B steel Bridge Type 321-type bailey bridge or 200-type bailey bridge Corrosion Original Painted or Hot Dip Galvanized Standard GB/BS/AS/EN/ANSI/JIS Color Army Green/Light Gray Loading capacity Design according to different requirements   Service: Pre-sale service: 1. We provide pre-sale service in various forms, for example, making investment budget, manufacturing, planning so that customers can make a reasonable plan with less cost. 2. Offer information of peripherals In-sale service: 1. We design the structure of the bridge after the customer telling us the specifications. 2. Technological information of provided bridges 3. Schedule about design, manufacturing and assembly 4. Working&producing progression 5.Training course for the technician so that the assembly is safe and standard. After-sale service: 1. For customers buying our products, we provide them free training so that they can assemble, use and maintain the bridge independently. 2. We will answer customer’s questions on technology in time. If needed, we will offer on-site guidance and assist. 3.We will provide installation manual, operation manual and maintenance manual for customers.   Advantage: 1. With a couple of years specializing in producing bailey bridges 2. Strong enterprise innovation, with groups of professional engineers and salesmen 3. Our high quality but low prices have gained market and public praise from domestic and abroad. 4.We have very good and comprehensive after-sales service.   Application: · Road Bridges · Pedestrian Bridges · Railway Bridges · Steel Truss Bridge · Beam Bridges · Steel Bailey bridge · Structural Steel Box Bridge   · Highway Bridges · Composite Beam Bridge · Cable-Stayed Bridge · Floating Bridge etc. Our experienced team is focused on your steel bridge project's success, from start to finish. Our proven ability to identify and overcome design inconsistencies, potential problems with erection, and shipping obstacles results in the fabrication of structural steel that is right the first time, helping you avoid costly construction delays.   Our company undertook the construction of national key projects from China Railway Bridge Bureau, China Tunnel Traffic and China Railway Shanghai Bureau. Because of the good quality, our productions are exposed to more than ten African and Asian countries, such as Laos, Angola, Bangladesh and Myanmar, so we are widely received by the international markets.   FASEC Buildings will take "integrity, harmony and high efficiency" as the core spirit, advance with the times, leapfrog development, and strive to make greater contributions to the steel bridge industry! We are willing to create a better tomorrow with you!

Luxurious Villa Commercial Steel Buildings Complex EPC Contractor Construction Quick detail:   1. Quick assembled 2. EPC contractor 3. Lightsteel villa     Grade: ASTM A36 JIS 490A or its equivalent Q235, Q345 Products&Service Scope: New style quick assembled steel modular buildings both for residential or commercial usage. good seismic and heat insulation, less polution, environment friendly, easy maintanence etc many great features compared to traditional concrete buildings. Except the general contracting of the complete building complex, we also do the seperate steel construction service as following scope: Application Our experience in steel framed residential or commercial buildings is extensive and includes the design and construction of many different steel framed structures including: 1. afforable housing for low income people 2. luxurious apartment for medium or high income elite 3. beautiful designed hotel and office buildings 4. university, hospital etc other function building complex..   Specifications Grade: Q235, Q345, 550 or any other standard Products&Service Scope: Design&Engineering Service, Steel Building,Space Frames, Portable Cabins, Tubular Steel Structures,basic building elements(built-up welded H-section , hot-rolled H-section, channel, steel column, steel beam),standard frames, secondary framing, roof & wall materials, Tempcon (sandwich) panels. And we offer Bespoke Design, construction and erection of specialist industrial steel buildings and steel frame agricultural buildings including full structural design and build covering all aspects of steelwork prefabrication. Engineering Design Software: PKPM, 3D3S, X-steel, etc. TECHNOLOGY R&D The company has over 1,200 employees of whom 206 are engineering technicians of all levels and all kinds and over 60 are state GradeⅠ, Grade Ⅱ registered structure engineers, builders and architects. The company has senior colleges and professional technology design organizations as the technology backup force and has established wide cooperation and R&D relations with such technology research institutes asZhejiang University, Northwestern Polytechnical University, Zhejiang Shuren University, etc. The commercial and residential buildings and prefabricated metal buildings designed and manufactured by us are the most cost-effective solution on the market today. Why is it the best way to choose us for you? We have long years of overseas market operation experience, from Asia, Oceania, to America, Africa continents. We have full supports of engineering and design teams which can offer suitable and various smart designs for client. We have flexible commercial strategy and a lot of project examples around the world. We works hard and always persue perfection during the project and engineering operation. We have both the fabrication and construction experience for main framed parts, which features us varity knowledge for better clients' service offer. Our Slogon is one trial order to start our long term constant cooperation. what we need is just a small chance to trial cooperation and relationships continues sustainable development! For any building and construction projects or steel related products need, please feel free to contact us and we will offer bespoke design, construction and erection of specialist for supporting.

Civil Engineering Construction Prefabricated Steel Buildings Residential Modern Hotels Quick detail:   1. Prefabricated And Pre-engineered Building Steel Industrial Warehouse 2. China Contractor And Fabricator 3. Offer EPC project     Grade: ASTM A36 JIS 490A or its equivalent Q235, Q345 Products&Service Scope: New style quick assembled steel modular buildings both for residential or commercial usage. good seismic and heat insulation, less polution, environment friendly, easy maintanence etc many great features compared to traditional concrete buildings. Except the general contracting of the complete building complex, we also do the seperate steel construction service as following scope: Application Our experience in steel framed residential or commercial buildings is extensive and includes the design and construction of many different steel framed structures including: • afforable housing for low income people • luxurious apartment for medium or high income elite • beautiful designed hotel and office buildings • university, hospital etc other function building complex.. Specifications Grade: Q235, Q345, 550 or any other standard Products&Service Scope: Design&Engineering Service, Steel Building,Space Frames, Portable Cabins, Tubular Steel Structures,basic building elements(built-up welded H-section , hot-rolled H-section, channel, steel column, steel beam),standard frames, secondary framing, roof & wall materials, Tempcon (sandwich) panels. And we offer Bespoke Design, construction and erection of specialist industrial steel buildings and steel frame agricultural buildings including full structural design and build covering all aspects of steelwork prefabrication. Engineering Design Software: PKPM, 3D3S, X-steel, etc. TECHNOLOGY R&D The company has over 1,200 employees of whom 206 are engineering technicians of all levels and all kinds and over 60 are state GradeⅠ, Grade Ⅱ registered structure engineers, builders and architects. The company has senior colleges and professional technology design organizations as the technology backup force and has established wide cooperation and R&D relations with such technology research institutes asZhejiang University, Northwestern Polytechnical University, Zhejiang Shuren University, etc. The commercial and residential buildings and prefabricated metal buildings designed and manufactured by us are the most cost-effective solution on the market today. Why is it the best way to choose us for you? We have long years of overseas market operation experience, from Asia, Oceania, to America, Africa continents. We have full supports of engineering and design teams which can offer suitable and various smart designs for client. We have flexible commercial strategy and a lot of project examples around the world. We works hard and always persue perfection during the project and engineering operation. We have both the fabrication and construction experience for main framed parts, which features us varity knowledge for better clients' service offer. Our Slogon is one trial order to start our long term constant cooperation. what we need is just a small chance to trial cooperation and relationships continues sustainable development! For any building and construction projects or steel related products need, please feel free to contact us and we will offer bespoke design, construction and erection of specialist for supporting.

Curved String Steel Truss Stiffened Continuous Beam Structure High-speed Railway Bridge The third and second strong curved steel truss stiffened continuous beam structure high-speed railway bridge in China, more than 30,000 sets of full bolt connections, after the box girder is connected, it has to go through the tension and the 2000-ton bridge erecting machine 20 times back and forth, the whole bridge forming accuracy Millimeter level.   Product Name Curved String Steel Truss Stiffened Continuous Beam Structure High-speed Railway Bridge Width14 meter or customer required sizes,etc. Maximum span 64meter single span and 200meter multi-span or customized. Bridge deck Steel composite panel,timber,concrete,etc. Steel grade Q345B (equivalent to ASTM A572) or customized materials,etc. Loading capacity 20ton, 40ton truck etc, or HS20-44, HS25-44/Truck 20 Corrosion Original painted or Hot dip galvanized,army blue,etc. Advantages Price effective and technical full analysis and supports     Features • Adaptable - pre-engineered to match each application • Fast - modular stocked components, open to traffic in days • Lower Cost - an alternative to custom designed bridges • Easy - to handle, transport, assemble, install and reuse   Advantage Possessing the features of simple structure, convenient transport, speedy erection easy disassembling, heavy loading capacity, great stability and long fatigue life being capable of an alternative span, loading capacity

Design Supply Construction of Tied-Arch Steel Bridge Deck with Bowstring Arch Girder Tied-arch bridge (also called bowstring-arch or bowstring-girder bridge) is a type of bridge that has an arch rib on each side of the roadway (deck), and one tie beam on each arches, that support deck. Vertical ties connected to the arches support deck from above. It can be considered a bridge between arch bridge and a suspension bridge. They work like arch bridges on one hand, because force of the load on the deck (thrust) is translated as tension to the curved top chord by vertical ties of the deck which try to flatten the arch and to push its tips outward into the abutments. Tips of the arch of this bridge are tied together by a bottom chord. This allows the bridge to be constructed with less robust foundations because force on the abutments is low. Tied-arch bridges can be built on elevated piers or in areas of unstable soil. One more positive attribute of this type of bridge is that it does not depend on horizontal compression forces for its integrity which allows them to be built off-site and then transported into place.   The tied-arch offers a solution when it can be arranged that the deck is at such a level that it can carry the horizontal force as a tie member. The tied-arch is sometimes referred to as a bowstring arch.   Product Name Design Supply Construction of Tied-Arch Steel Bridge Deck with Bowstring Arch Girder Width 7.6meter or customer required sizes,etc. Maximum span 64meter single span and 200meter multi-span or customized. Bridge deck Steel composite panel,timber,concrete,etc. Steel grade Q345B (equivalent to ASTM A572) or customized materials,etc. Loading capacity 20ton, 40ton truck etc, or HS20-44, HS25-44/Truck 20 Corrosion Original painted or Hot dip galvanized,army blue,etc. Advantages Price effective and technical full analysis and supports   Advantages: A. Reasonable structure, high rigidity, clear force, high driving comfort, strong adaptability to terrain and geological conditions B. The technical and economic indicators are relatively advanced, which can shorten the length of the approach bridge and reduce the overall cost of the bridge C. The bridge is beautiful, reflecting the unity of power and beauty, and the harmony between the structure and the environment, which enhances the landscape effect D. The workload of inspection, maintenance and repair is large, and it is necessary to detect the stress of the boom, check the status of the anchor, regularly replace the sealing paste, and remove and replace the boom, etc.

Aluminum Purlins Cee Channel and 5052-H36 Aluminum Alloy Balustade Frameworks   We have high strength AS/NZS, BS etc standard DHS Equivalent purlins and girts under sale chart.  welcome clients in need to enquiry it. In architecture, structural engineering or building, a purlin (or historically purline, purloyne, purling, perling) is any longitudinal, horizontal, structural member in a roof except a type of framing with what is called a crown plate. In traditional timber framing there are three basic types of purlin: purlin plate, principal purlin and common purlin.   In steel construction, the term purlin typically refers to roof framing members that span parallel to the building eave, and support the roof decking or sheeting. The purlins are in turn supported by rafters or walls. Purlins are most commonly used in Metal Building Systems, where Z-shapes are utilized in a manner that allows flexural continuity between spans.   It is the practice in the steel industry that structural shapes are assigned representative designations for convenient shorthand description on drawings and documentation: Channel sections, with or without flange stiffeners, are usually referenced as C shapes; Channel sections without flange stiffeners are also referenced as U shapes; Point symmetric sections that are shaped similar to the letter Z are referenced as Z shapes. Section designations can be regional and even specific to a manufacturer. In steel building construction, secondary members such as purlins (roof) and girts (wall) are frequently cold-formed steel C, Z or U sections, (or mill rolled) C sections.   Cold formed members can be efficient on a weight basis relative to mill rolled sections for secondary member applications. Additionally, Z sections can be nested for transportation bundling and, on the building, lapped at the supports to develop a structurally efficient continuous beam across multiple supports. Specifications: Technical Standard: AS/NZS, BS, ASTM,JIS etc Steel Grade G250-G550 etc Material DX51D / SGCC / SGCH etc Types: Commercial / Drawing / Deep Drawing / Structural quality Width 100-500mm Thickness 0.13-5.0mm (popular thickness : 0.14-2.0mm) Weight Coating 30-275g/m2 Surface Treatment chromed / skin pass / oiled / slightly oiled / dry Spangle zero spangle / minimized spangle / regular spangle / big spangle ID Coil 508mm/610mm Coil Weight 3-8MT per coil Package: sea worthy package Application: industrial panels, building, steel structure Price Terms FOB, CFR, CIF Payment Terms L/C, D/P, T/T delivery Time 15-30 days after received deposit Features: Sturdy design and superior strength Corrosion resistanct surface finish Ideal for structural supporting applications Excellent dimensional stability   Advantages: Very high strength-to-weight ratio; high strength, low cost. 40% saving in steel; 30% saving in overall construction cost. Easy and low-cost handling and transportation. Economy due to reduction in dead weight on main frame structure. Significantly reduces installation time. Ability to span long lengths. No site drilling or cutting required. Maintenance-free owing to application of proper surface finish. Factory-finished, cut to exact lengths with pre-punched holes to avoid time and material wastage. Continuous splay and splicing for better structural strength, stability and economy. 450 lip for better sectional modulus and easy nesting   Purlins are quite popular these days and are available in different shapes and sizes in the market. Commonly it looks similar to the English alphabets and some of the most commonly used purlins consist of Z and C Purlins. The major reasons of its popularity is, with the use of the purlin roof coveringhouse top or roof can be given different shapes as per the desire of the owner or customer. So it does not matter if an individual is willing to give its roof a flat or cone shaped look all of it will fit perfectly well with purlins.   This roof purlin is made of good quality steel such that it can bear the load of a building and remain firm and steady. Hence individuals can pick up any of them according to their choice and preference.It can also be used in wooden construction and it is also called as arcade plate. These plates can also be called as beams which provide support to rafters. These rafters thus form the basis of a wider building.   Installation of purlins is quite an easy task. The purlins made of steel can be easily cut with nibbler however it be any material all of them requires traditional form of fixing such that it can remain steady for many years to come. But the best part of using a purlin is it is light weight and its width, length and height all of it can be customized according to the wish of customers. Purlin roof thus makes the roof a lot firm and solid as per the desire of users.   Applications: High Rise Buildings Multiplexes/Commercial Buildings Power Plant Buildings Office Buildings Mezzanine Floors in Industrial Buildings Warehouses, Sheds, Barns etc.     Welcome client's enquiry for more details.