Product name: stainless steel gutter.     Product material: SS316L     Product surface: silver gray surface, bright surface, polished surface, brushed surface, etc.     Production process: cutting, bending, laser, grooving.     Product features: good processing and forming, good welding performance.     Product use: Drainage channels for factory roofs, engineering communities, architectural decorations, etc.   The company’s existing series of bending machines include 3-meter bending machines, 4-meter bending machines, 4.25-meter bending machines, 6-meter bending machines, and 9-meter bending machines, which can process stainless steel with a thickness of up to 12MM; shearing machine tools include 8*6000MM, 8*4000MM, 4*2000MM, 10*100MM, 1.5*200MM, etc.     It has the advantages of long processing parts and high processing accuracy, and has great advantages for bending of stainless steel shear plates.

Highway Railway Skewed and Curved Steel I-Girder Truss Bridge Construction Company A truss bridge is a bridge whose load-bearing superstructure is composed of a truss, a structure of connected elements, usually forming triangular units. The connected elements (typically straight) may be stressed from tension, compression, or sometimes both in response to dynamic loads.   Product Name Highway Railway Skewed and Curved Steel I-Girder Truss Bridge Construction Company Width14 meter or customer required sizes,etc. Maximum span 64meter single span and 200meter multi-span or customized. Bridge deck Steel composite panel,timber,concrete,etc. Steel grade Q345B (equivalent to ASTM A572) or customized materials,etc. Loading capacity 20ton, 40ton truck etc, or HS20-44, HS25-44/Truck 20 Corrosion Original painted or Hot dip galvanized,army blue,etc. Advantages Price effective and technical full analysis and supports     Features • Adaptable - pre-engineered to match each application • Fast - modular stocked components, open to traffic in days • Lower Cost - an alternative to custom designed bridges • Easy - to handle, transport, assemble, install and reuse   Advantage Possessing the features of simple structure, convenient transport, speedy erection easy disassembling, heavy loading capacity, great stability and long fatigue life being capable of an alternative span, loading capacity

LSAW Submerged Arc Welding Carbon Steel Pipe for Piling Use LSAW steel pipe (Longitudinally Submerged Arc Welding abbreviated as LSAW) is a professional expression term for LSAW steel pipe. It uses a single medium and thick plate as the raw material, and the steel plate is pressed (rolled) in a mold or forming machine into a tube blank. Submerged arc welding method and expanded diameter to produce pipes.   Material of LSAW Steel Pipe     Pipe Standard API 5L PSL1/PSL2 Gr.A,Gr.B,X42,X46,X52,X56,X60,X65,X70 ASTM A53 ASTM 572 ASTM A252 AN/NZS 1163 AN/NZS 1074 EN10219-1 EN10217-1 Size OD: 219mm-1625mm WT: 7-50mm LENGTH: 5.8/6/11.8/12m   Applications: LSAW pipe is used to convey low-pressure liquid or high-pressure petroleum or natural gas and can also be used widely in structural supports or foundations. Base on its advantage of high reliability and safety performance, the LSAW pipe is widely used in various pipelines engineering and construction, even under the most severe condition, and also can be used in engineering of chemical industry, electric power, irrigation, construction and piling etc. LSAW pipes for oil and gas pipeline The advantage for the LSAW type is that they could produce more thick wall thickness of pipes, maximum to 120 mm.   Main features of LSAW steel pipe: 1) The steel pipe has a longitudinal weld, and the inner and outer welds are all welded by submerged arc welding. 2) After the overall mechanical expansion treatment, the internal stress of the steel pipe is small and evenly distributed, which can effectively prevent stress corrosion cracking, has high dimensional accuracy, and is convenient for on-site welding construction. 3) Pre-welding and finishing welding process is adopted, the welding process is stable, and the welding seam quality is high. 4) Welding seam is easy to realize non-destructive flaw detection in the production process and non-destructive flaw detection in the field during use. 5) The range of product specifications is large, which can produce steel pipes with small diameter and large wall thickness as well as large diameter and large wall thickness.

Steel Framed Building Design Of Steel Structures & Construction By Famous Architecture Firm   Quick detail: 1. Specialized and experienced design and detailing team 2. Excellent design quality with real low price even zero cost 3. Especially good at the prefab steel workshop/steel shed design 4. Various design standard like ASTM, GB, JIS are available 5. Totally customize     FAMOUS Core advantages: l Complete design & build system available l Over 15 years experience in domestic and overseas building& construction field l Professional design team and fabrication team with mature quality control system l Timely budgeting and extreme low consulting service   Please kindly send below information for a preliminary quotation: 1. Service scope, i.e. from general planning, to architecture design, to structural design, water& electricity design, heating& ventilation design etc completely or partially 2. The building or structural style which need to be designed, in other words to comment its design complication. 3. Design standard requirement. We are capable to design according to China, USA, Europe, Australia etc various customized standards requirement. 4. Various construction areas and dimensions as well as function etc information offered.   Available Design Standard: After many years of overseas project operation, FAMOUS have rich experience in foreign construction projects design and be familiar with most commonly used design standards like ASTM, JIS, BS, EU, AS/NZS etc. Especially on the aspect of America and Europe design standards, it is quite experienced and skilled. Taking example of steel construction field. Compared to the difference between Chinese steel material and American Standard material or IPE(European Standard) material, FAMOUS have a mature system for steel beam replacement now. In other words, even you provide us the drawings designed by any standard, FAMOUS can use either Chinese steel components instead of any special standard size perfectly after calculation if need fabrication in China, or use original country material to design as per client’s need.   FAMOUS is engaged in planning, engineering design and consultation, EPC, and the whole process service of construction projects. The business scope of FAMOUS covers various fields of the construction industry, including the specialties of power field like wind, solar, electric, petrochemical field, infrastructure aspect, commercial and residential real estate field, mining and machinery field and so on, what’s more, we also focus on the underground space development, planning, architecture, environmental engineering, urban landscape, geotechnical engineering, surveying, inspection testing, construction management, EPC, and etc.. The comprehensive strength of the FAMOUS has been among the top municipal engineering companies in China.   Main Business Engineering consultation Project planning / Formulation of project proposal / Formulation of feasibility study report / Planning & design consultation / Design bidding / Agent for Project bidding / Design supervision / Project supervision / Project management / Project evaluation Planning Urban planning / Town planning / Planning for community /Planning for development zone Building design/ Residential design / Public building design / Industrial building design Municipal design General municipal engineering design /Urban gas & industrial gas planning/ Sewage & refuse disposal design / Road & bridge design Note: The above-mentioned scope of works does not cover scientific technology research, real estate development and project construction business. Special trade design Building intelligence design/ Landscape design / Interior design / Construction drawing verification department   Standard design Formulation of standards & codes / Standard drawing design Building technology Green buildings technology / MEP energy-saving technology / Scientific research & design technology / Building economy technology Architectural history Historical building research / Traditional building design   Hangzhou FAMOUS Steel Engineering Co., Ltd. as a large-scale design & construction company majoring in engineering survey & design, engineering consultation and general contracting etc, FAMOUS has got the Certificates of Approval for independently engaging in foreign economic cooperation and operation and import & export. After many years’ professional service, comprehensive engineering design, comprehensive engineering investigation, engineering consultation and engineering surveying & mapping, our company is able to undertake the consultation, survey & design, engineering general contracting, tendering agency, engineering supervision and project management of various industries and fabrication of steel-based product, and general constructions of steel-concrete mixed projects. Besides, it can undertake special design, evaluation, assessment and equipment purchase of environmental protection, geological hazard, geological investigation, soil & water conservation, earthquake safety, pressure pipeline and pressure vessels. FAMOUS has been engaged in construction of scientific and efficient modern enterprise management system, continuous improvement of corporate operation system and management mechanism and steady up-grading of lean management level. It has established a quality, environment, occupational health & safety management system covering all its business fields and management system aiming at an international engineering corporation with design as main and integrating design, purchase, construction and commissioning.   Except various design and engineering service, Hangzhou FAMOUS Steel Engineering Co., Ltd. are also professional in the construction, real estate development industry, in the field of scientific research, equipment installation, decoration, municipal road and bridge, environmental protection, energy efficiency, logistics and distribution, etc. of large enterprise groups as a whole.

America Standard ASTM A588 Corten Steel Plate Piling and Structural Steel Truss Bridge ASTM A588 covers high-strength low-alloy structural steel shapes, plates, and bars for welded, riveted, or bolted construction but intended primarily for use in welded bridges and buildings where savings in weight or added durability are important. ASTM A588 is a high strength low-alloy structural steel specification with higher strength and improved atmospheric corrosion resistance for structural steel shapes such as angles, channel and beams, as well as steel plate and bars. ASTM A588 is primarily used for: Pedestrian Bridges Highway Bridge Girders and other bridge components Shipbuilding Tanks Railcars and Containers Fencing Sculptures The A588 specification is intended primarily for use in unpainted applications, where savings in weight or added durability is important along with the longer life cycle due to its corrosion resistant properties and/or to achieve an aesthetically pleasing appearance.   The atmospheric corrosion resistance of A588 is substantially better than that of carbon steels such as A36 and A572-50 with or without copper addition. When properly designed and exposed to the atmosphere, A588 is suitable for many applications in the unpainted condition.   ASTM A588 has a 50ksi minimum yield strength and a 70ksi minimum tensile strength. Classification: 1. High weathering steel High weather resistance structural steel is to add a small amount of copper, phosphorus, chromium, and nickel elements to the steel to form a protective layer on the surface of the metal collective to improve the performance of the steel against atmospheric corrosion. You can also add a small amount of molybdenum, niobium, Elements such as vanadium, titanium and zirconium can refine the grains, improve the mechanical properties of steel, improve the strength and toughness of steel, reduce the brittle transition temperature, and make it have better resistance to brittle fracture. 2. Weathering steel for welding structure The elements added to the steel grade, except for phosphorus, are basically the same as high weather resistance structural steels, and their functions are the same and improve welding performance. Features: Weathering steel has the characteristics of toughness, plastic stretching, forming, welding and cutting, wear resistance, high temperature resistance and fatigue resistance of high-quality steel; weather resistance is 2-8 times that of ordinary carbon steel, and the coating performance is 1.5 of ordinary carbon steel. -10 times, the coating performance is 1.5-10 times that of ordinary carbon steel, can be used for thin coating, bare coating or simplified coating. This steel has the characteristics of anti-rust, corrosion resistance, extended life, thinning and consumption reduction, labor-saving and energy-saving, which benefits component manufacturers and users. Weathering steel has better corrosion resistance in the atmosphere. Weathering steel can be thinned, exposed or simply painted. The steel system with corrosion resistance, life extension, labor saving, consumption reduction and upgrade is also a new mechanism, new technology and new process that can be integrated into modern metallurgy, so that it can continue to develop and innovate. Steel system. Advantages: Weathering steel is made of ordinary carbon steel with a small amount of corrosion-resistant elements such as copper and nickel. It has the characteristics of steel strength, ductility, forming, welding, abrasion, high temperature, fatigue, etc.; weather resistance is 2~8 of ordinary carbon steel The coating performance is 1.5~10 times that of ordinary carbon steel, which can be used in thinner, bare or simplified coating. The steel has the characteristics of rust resistance, corrosion resistance and longevity of components, thinning and consumption reduction, and labor-saving and energy-saving characteristics, which benefit component manufacturers and users. Application: The use of high weather resistance structural steel is better than weather resistance steel for welded structure because of its atmospheric corrosion resistance. It is mainly used for bolting, riveting and welding structural parts for vehicles, containers, buildings, towers and other structures. When used as welded structural parts, the thickness of the steel should not be greater than 16mm. The welding performance of weathering steel for welded structure is better than that of high weathering steel, and it is mainly used for welded structural parts for bridges, buildings and other structures.

High Speed Aluminum Rigid Can Production Line for Beverage Chemical and Medical The aluminum can production line is a set of machines that produce monolithic aerosol cans and bottles. Our aluminum can production line is fully automatic. Each piece of equipment in this series can work alone or form part of a production line according to customer needs. The main equipment consists of frying machine, cold extrusion machine, trimming machine, washing machine, intermediate storage, inner wall spraying machine, curing oven, base color printing machine, printing machine, varnishing machine, oven and necking machine. The production rate is 90-120 cans/min.   All equipments of this series are of reasonable structure, advanced design, high degree of automation, and can be produced quickly. All machines are controlled by Siemens PLC to ensure stability. To save energy, both the paintbaking machine and the oven are heated by gas. The host and control components are all brand-name products to ensure reliable and stable performance. All products can pass through the production line automatically. The color touch screen displays instant speed and yield information for easy management.   Main features: 1. Production speed:≤120pieces/min 2. Diameter: φ60mm- φ90mm 3. Motor power:230KW 4. Dimensions:68000×4600×6200mm 5. Intake pressure:0.55 MPA 6.Gas consumption:500M^3/24h   Aluminum cans have the following advantages: 1. Lightweight, non-toxic, and easy to recycle; 2. Good corrosion resistance and long service life; 3. High anti-counterfeiting degree and good sealing performance; 4. High strength, not easy to break; 5. High security; 6. Low cost.   The advantages of aluminum over steel (tinplate) cans include; 1. light weight 2. competitive cost 3. usage of easy-open aluminum ends: no need for a can opener clean appearance 4. aluminum does not rust 5. easy to press into shape   Applications: Perfume, pesticide bottles, hair sprays, medicines, fire extinguishers, oil and paints.

UK Europe America Standard Structural Steelworks Project Engineering Design and Consulting Fabrication   Quick detail: 1. Specialized and experienced design and detailing team 2. Excellent design quality with real low price even zero cost 3. Especially good at the prefab steel workshop/steel shed design 4. Various design standard like ASTM, GB, JIS are available 5. Totally customize     FAMOUS Core advantages: l Complete design & build system available l Over 15 years experience in domestic and overseas building& construction field l Professional design team and fabrication team with mature quality control system l Timely budgeting and extreme low consulting service   Please kindly send below information for a preliminary quotation: 1. Service scope, i.e. from general planning, to architecture design, to structural design, water& electricity design, heating& ventilation design etc completely or partially 2. The building or structural style which need to be designed, in other words to comment its design complication. 3. Design standard requirement. We are capable to design according to China, USA, Europe, Australia etc various customized standards requirement. 4. Various construction areas and dimensions as well as function etc information offered.   Available Design Standard: After many years of overseas project operation, FAMOUS have rich experience in foreign construction projects design and be familiar with most commonly used design standards like ASTM, JIS, BS, EU, AS/NZS etc. Especially on the aspect of America and Europe design standards, it is quite experienced and skilled. Taking example of steel construction field. Compared to the difference between Chinese steel material and American Standard material or IPE(European Standard) material, FAMOUS have a mature system for steel beam replacement now. In other words, even you provide us the drawings designed by any standard, FAMOUS can use either Chinese steel components instead of any special standard size perfectly after calculation if need fabrication in China, or use original country material to design as per client’s need.   FAMOUS is engaged in planning, engineering design and consultation, EPC, and the whole process service of construction projects. The business scope of FAMOUS covers various fields of the construction industry, including the specialties of power field like wind, solar, electric, petrochemical field, infrastructure aspect, commercial and residential real estate field, mining and machinery field and so on, what’s more, we also focus on the underground space development, planning, architecture, environmental engineering, urban landscape, geotechnical engineering, surveying, inspection testing, construction management, EPC, and etc.. The comprehensive strength of the FAMOUS has been among the top municipal engineering companies in China.   Main Business Engineering consultation Project planning / Formulation of project proposal / Formulation of feasibility study report / Planning & design consultation / Design bidding / Agent for Project bidding / Design supervision / Project supervision / Project management / Project evaluation Planning Urban planning / Town planning / Planning for community /Planning for development zone Building design/ Residential design / Public building design / Industrial building design Municipal design General municipal engineering design /Urban gas & industrial gas planning/ Sewage & refuse disposal design / Road & bridge design Note: The above-mentioned scope of works does not cover scientific technology research, real estate development and project construction business. Special trade design Building intelligence design/ Landscape design / Interior design / Construction drawing verification department   Standard design Formulation of standards & codes / Standard drawing design Building technology Green buildings technology / MEP energy-saving technology / Scientific research & design technology / Building economy technology Architectural history Historical building research / Traditional building design   Hangzhou FAMOUS Steel Engineering Co., Ltd. as a large-scale design & construction company majoring in engineering survey & design, engineering consultation and general contracting etc, FAMOUS has got the Certificates of Approval for independently engaging in foreign economic cooperation and operation and import & export. After many years’ professional service, comprehensive engineering design, comprehensive engineering investigation, engineering consultation and engineering surveying & mapping, our company is able to undertake the consultation, survey & design, engineering general contracting, tendering agency, engineering supervision and project management of various industries and fabrication of steel-based product, and general constructions of steel-concrete mixed projects. Besides, it can undertake special design, evaluation, assessment and equipment purchase of environmental protection, geological hazard, geological investigation, soil & water conservation, earthquake safety, pressure pipeline and pressure vessels. FAMOUS has been engaged in construction of scientific and efficient modern enterprise management system, continuous improvement of corporate operation system and management mechanism and steady up-grading of lean management level. It has established a quality, environment, occupational health & safety management system covering all its business fields and management system aiming at an international engineering corporation with design as main and integrating design, purchase, construction and commissioning.   Except various design and engineering service, Hangzhou FAMOUS Steel Engineering Co., Ltd. are also professional in the construction, real estate development industry, in the field of scientific research, equipment installation, decoration, municipal road and bridge, environmental protection, energy efficiency, logistics and distribution, etc. of large enterprise groups as a whole.

America Standard ASTM Fabricated Structural Steel Frame Construction and Design Detailing Steel structure is a structure composed of steel materials, which is one of the main types of building structures. The structure is mainly composed of beams, steel columns, steel trusses and other components made of profiled steel and steel plates. It adopts silanization, pure manganese phosphating, washing and drying, galvanizing and other rust removal and rust prevention processes. Components or parts are usually connected by welding, bolts or rivets. Because of its light weight and easy construction, it is widely used in large-scale factory buildings, stadiums, and super high-rise areas. Steel structures are susceptible to corrosion. Generally, steel structures need to be derusted, galvanized or painted, and regularly maintained.   Steel is characterized by high strength, light weight, good overall rigidity, and strong resistance to deformation. Therefore, it is particularly suitable for the construction of large-span, ultra-high, and super-heavy buildings; the material has good homogeneity and isotropy, which is ideal elasticity Material, which best meets the basic assumptions of general engineering mechanics; the material has good plasticity and toughness, can have large deformation, and can withstand dynamic loads well; the construction period is short; it has a high degree of industrialization, and can be specialized in production with a high degree of mechanization.   For steel structures, high-strength steels should be studied to greatly increase their yield point strength. In addition, new types of steels, such as H-shaped steel (also known as wide-flange steel) and T-shaped steel, as well as profiled steel plates, are rolled to adapt to large-span structures and The need for super high-rise buildings.   In addition, there is a heat-resistant bridge light steel structure system. The building itself is not energy-efficient. This technology uses clever special connectors to solve the problem of cold and hot bridges in the building. The small truss structure allows cables and water pipes to pass through the wall for construction. Decoration is convenient.   Advantage: The steel component system has the comprehensive advantages of light weight, factory-made manufacturing, fast installation, short construction cycle, good seismic performance, fast investment recovery, and less environmental pollution. Compared with reinforced concrete structures, it has more The unique advantages of the three aspects of development, in the global scope, especially in developed countries and regions, steel components have been reasonably and widely used in the field of construction engineering.   Carrying capacity: Practice has shown that the greater the force, the greater the deformation of the steel member. However, when the force is too large, the steel members will fracture or severe and significant plastic deformation, which will affect the normal work of the engineering structure. In order to ensure the normal working of engineering materials and structures under load, it is required that each steel member should have sufficient load-bearing capacity, also known as bearing capacity. The bearing capacity is mainly measured by the sufficient strength, stiffness and stability of the steel member.   Sufficient strength Strength refers to the ability of a steel component to resist damage (fracture or permanent deformation). That is to say, no yield failure or fracture failure occurs under the load, and the ability to work safely and reliably is guaranteed. Strength is a basic requirement that all load-bearing members must meet, so it is also the focus of learning.   Sufficient stiffness Stiffness refers to the ability of a steel member to resist deformation. If the steel member undergoes excessive deformation after being stressed, it will not work properly even if it has not been damaged. Therefore, the steel member must have sufficient stiffness, that is, no stiffness failure is allowed. Stiffness requirements are different for different types of components, and relevant standards and specifications should be consulted when applying.   Stability Stability refers to the ability of a steel component to maintain its original equilibrium form (state) under the action of an external force. The loss of stability is the phenomenon that the steel member suddenly changes the original equilibrium form when the pressure increases to a certain degree, which is referred to as instability. Some compressed thin-walled members may also suddenly change their original equilibrium form and become unstable. Therefore, these steel components should be required to have the ability to maintain their original equilibrium form, that is, have sufficient stability to ensure that they will not be unstable and damaged under the specified conditions of use. The instability of the pressure bar generally occurs suddenly and is very destructive, so the pressure bar must have sufficient stability. In summary, in order to ensure the safe and reliable working of steel members, members must have sufficient bearing capacity, that is, have sufficient strength, stiffness and stability, which are the three basic requirements for ensuring the safe work of components.   Metal fabrication is the creation of metal structures by cutting, bending, and assembling processes. It is a value-added process involving the creation of machines, parts, and structures from various raw materials.   Metal fabrication usually starts with drawings with precise dimensions and specifications. Fabrication shops are employed by contractors, OEMs and VARs. Typical projects include loose parts, structural frames for buildings and heavy equipment, and stairs and hand railings.   Specification: 1 Main steel structure H section steel structure 2 Steel surface treatment painting or galvanized 3 Bracing angle steel, belt bar, steel bar, etc. 4 Wall and roof panel EPS, rock wool, fiber glass, PU sandwich panel or one layer corrugated steel plate 5 Bolts anchor bolts, intensive bolts, commen bolts 6 Purlin C section, Z section purlin in different size 7 Edge cover Made of color steel plate 8 Gutter and down pipe Gutter made of color steel plate or galvanization plate, PVC down pipe 9 Crane Crane to lift 2 ton to 10 ton 10 Door Sliding door, rolling door, lift door, etc. 11 Window PVC window, aluminium window, steel window, etc. 12 Accessories Nails, sealing glue, gasket, etc.   The Quality of Structural Steel There are many different choices when it comes to structural steel. The lower the carbon content in the steel that is chosen determines the ease of welding. Lower carbon content equals a faster rate of production on construction projects, but it can also make the material more difficult to work with. FAMOUS is able to offer structural steel solutions that are both efficiently made and highly effective. We will work for you to determine the perfect type of structural steel for your project. The processes used to design structural steel can change the cost. However, structural steel is a cost effective material when used properly. Steel is an excellent, highly-sustainable material, but it is far more effective in the hands of experienced and well-educated engineers who understand its properties and potential benefits. Overall, steel holds a huge number of advantages to contractors and others who intended to utilize it for industrial applications. Experts have found that even reinforcing older buildings with new welding processes can significantly improve the strength of the building. Imagine the benefits of using expertly welded structural steel from the start for you construction project. Then contact FAMOUS for all of your structural steel welding and fabrication needs.

Low-E 5mm+12A+5mm Double Tempered Clear Glass Awning Window with Operator Handle   TOPSKY aluminum decorative glass doors offer an attractive solution for commercial and industrial applications. Of course, visual access, light penetration and aesthetics are the main considerations for customer selection. Aluminum alloy glass doors are available in a variety of window frames, glass materials, track styles and finish options, which makes them more versatile. Our aluminum glass doors are practical, durable and aesthetically pleasing, ideal for car dealerships, shopping mall showroom doors, service stations, fire stations, professional facilities and retail environments. The main advantage is the long life of the design. Maintenance free and durable. A glass door, patio door, or doorwall is a type of sliding door in architecture and construction, is a large glass window opening in a structure that provide door access from a room to the outdoors, fresh air, and copious natural light. A sliding glass door is usually considered a single unit consisting of two panel sections, one being fixed and one a being mobile to slide open. Another design, a wall sized glass pocket door has one or more panels movable and sliding into wall pockets, completely disappearing for a 'wide open' indoor-outdoor room experience.   Specifications: Item Name Low-E 5mm+12A+5mm Double Tempered Clear Glass Awning Window with Operator Handle Size Customized Profiles 1.1.4-3.0mm thickness aluminum profiles 2.Aluminium alloy profiles frames 3.Status: T5 T6 or other special status Glass 1.Double toughened glazing:5+12A+5,6+12A+6... 2.Single toughened glazing:6,8,10,12... 3.Laminated glazing:6.38,10.76,10.38... 4.Low-e glazing, frosted/obscure glazing, grey/blue/green tinted glazing... Hardware 1.Germany brand 2.Japaness brand 3.Chinese brand Mesh 1.Stainless steel security mesh 2.Aluminium security mesh 3.Burglar screen 4.Mosquito screen Finish 1.Powder coating 2.Anodized 3.Electrophoresis 4.Wood grain Types Decorative bi fold doors, Sliding door, Hinge door, Bi fold door Lift and sliding door, Pivot door, Escape door Sensor door, Glass louvre, Aluminum louvre Sunroom windows and doors Color Gray, Black, Silver, Wood Grain, others MOQ 1 set Lead time 20-35working days       Produce process:   Main Features:   Aluminium Profile: Our aluminum structure is based on common project requirements in the aim of cost-effective durability of the stylish, premium finishes of our signature Collection, or the complete design freedom offered by the high-end commercial and residential collection.   Glass: We provide Australian standard, American standard, European standard certification of toughened glass options to suit your unique preferences for security, noise and energy efficiency.   Hardware: We usually provide Germany Brand hardware + Chinese  Brand hardware   Advantages of Aluminum door   1. Aluminum is 3 ½ times stronger than vinyl (PVC) and 43 times stronger than wood with a high strength-to-weight ratio, making it the ideal material for windows and doors. Our Hurricane-resistant window and door frames take full advantage of the strength that aluminum offers. In the commercial market, aluminum has long outperformed vinyl (PVC) and wood windows and has proven to be the window and door frame material to meet the highest demand in strength, performance and longevity. In residential applications, aluminum windows and doors are known to last decades longer than wood and vinyl (PVC). Aluminum resists rodents, termites and vermin.   2.Coastal conditions only emphasize the need for aluminum as a framing material. This lightweight, yet extremely strong metal is used on jumbo jets and stands up to the humid, corrosive coastal air by never warping, rotting or corroding.   3.Despite aluminum’s energy conductivity, very little energy is actually lost through the frame material. When combined with a thermal break, aluminum becomes an extremely energy efficient material. Vinyl (PVC) and wood window frames absorb heat and cold into the frame, causing that material to fail prematurely. Aluminum is thermally stable: it does not swell and shrink when temperature or humidity levels change. To the contrary, with vinyl (PVC) and wood frames, energy is lost due to their high level of expansion and contraction.   4.Aluminum is a non-combustible material. Typically, vinyl (PVC) and wood windows are quickly damaged by heat and embers whereas our extruded aluminum retains its form at 1000 degrees Fahrenheit.   5.Aluminum offers a great variety of rich and luxurious finishes that require minimal maintenance.   6.Aluminum is a 100% recyclable, non-toxic and a fully sustainable product. It is naturally plentiful and perpetually surviving (recyclability). Additionally, aluminum rates very high in Life Cycle Assessment and leaves a small ecological footprint.Aluminum is an abundant and sustainably harvested resource.     Product Name:Aluminum sliding door Material:Aluminum alloy Profile Thickness:1.2mm--2.0mm, Normally 1.4mm for window, 2.0mm for door Color:Matt black;white;ultra silver;clear anodized;nature clean aluminium;Customized Surface Treatment: 1. Powder coated 2. Anodized 3. Electrophoresis Screen:Stainless steel security mesh, Fiberglass fly screen, Nelon Glass: 1.Tempered Insulated Glass:5+9A+5/5+12A+5/5+16A+5,etc 2.Laminated Glass:6.38mm,8.38mm,8.76mm,10.76mm,11.52mm,etc 3.Tinted / Reflective / Frosted Performance: Heat & Sound insulation and Waterproof White/black/grey/brown/cream/silver (special colors available according to customer requirement) Accessories: Use EPDM sealant rubber Stainless steel 304#,316#  accessories. Specification Item Name Aluminum Golden color Fixed Windows With Mosquito Net Aluminum Profile 2.0mm, thermal break or non-thermal break aluminum Finished Powder coating/ PVDF coating/ Woodgrain Aluminum Color Standard color: dark grey, coffee, woodgrain Customized color base on quantity Opening Inside opening/ outside opening/ tophung/ tilt and turn Glass Double tempered clear glass: 5mm+12A/ 20A+5mm Double tempered LowE glass: 5mm+12A/ 20A+5mm LowE Tinted glass Frosted glass Hardware Chinese hardware and Germany hardware Mosquito net 0.8mm Stainless steel net Package (1) Film+ EPE+ plywood case (2) Film+ EPE Delivery Time Standard product: 20 working days after getting the deposit and drawing confirmation. Customized product: 30 working days after getting the deposit and drawing confirmation.    

The corporate upholds the philosophy of "Be No.1 in excellent, be rooted on credit rating and trustworthiness for growth", will keep on to serve outdated and new clients from home and abroad whole-heatedly for Factory supplied China Foaming Interlocking Hollow Block Foam Concrete Mold, As a key enterprise of this industry, our corporation makes attempts to become a leading supplier, depending on the faith of expert excellent & throughout the world assistance. The corporate upholds the philosophy of "Be No.1 in excellent, be rooted on credit rating and trustworthiness for growth", will keep on to serve outdated and new clients from home and abroad whole-heatedly for China Clc Block Foaming, Concrete Hollow Blocks Moulds, We've a large share in global market. Our company has strong economic strength and offers excellent sale service. Now we have established faith, friendly, harmonious business relationship with customers in different countries. , such as Indonesia, Myanmar, Indi and other Southeast Asian countries and European, African and Latin American countries. High Density EPS Sandwich Panels with Water Resistant for Roof and Wall Panels   Polystyrene Core EPS sandwich panel production process adopts the colored steel sheet as surface board, and the core material is the self-extinguishing closed cell polystyrene foam, It is a kind of high strength composted building material, and it was formed in the automated continuous-molding machine, by combining the pressed colored steel sheet with the High Strength Adhesives. It has the characteristics of complete insulation and fire-proof, fast construction , durability, and beautiful appearance, etc.   Expanded polystyrene (EPS) core sandwich panels   Specifications Thickness of color steel sheets 0.3-0.8mm Thickness of EPS/PU core 40-200mm Effective width Wall panel: 950mm 1150mm Roof panel: 950mm 1050mm Length As client’s requirements Materials EPS sandwich panel, Color steel sheets Structure Upper and lower layer: Color steel sheetMiddle: polystyrene foam board or polyurethane foam board Color All colors (standard international color) or customers samples’ color The polystyrene density 8-25kg/m3 Sample Available freely Character Light in weight, heat insulation, water resistant, green and environmental   Features of EPS Sandwich Panel 1. EPS sandwich panel has the following characteristics: light dead weight, high mechanical strength, excellent shearing resistant performance, strong corrosion resistance, high durability, and weather fastness, etc. 2. The sandwich panel has excellent insulating performance: heat insulation, sound insulation, waterproof performance, etc. 3. It is easy to install and can be used many times over. 4. Nowadays, the EPS sandwich panel is widely used for cleaning workshops, industrial factory buildings, office buildings, stadiums, villas, and public buildings, etc.   Advantages: 1. Broad Availability ,wide range of material for your choice 2. Outstanding formality with beautiful appearance with rich color 3. Superior Durability 4. Excellent Cost Effectiveness 5. Light weight , easy to transportation ,easy to install 6. Fireproof , heat preservation ,sound isolation   Applications: 1. Widely used in construction, heat preservation, packaging, frozen, daily necessities, industrial casting, etc. 2. Also be used to display the assembly places, commodity cabinet, signs and toys manufacture. 3. Mainly applies heat preservation 4. Carport, Hotel, House, Office, Sentry Box,Guard House, Shop, Toilet, Villa, Warehouse, Workshop,Plant   DETAILS OF THE PANEL JOINT   SECTIONAL VIEW OF THE PANELS   TYPES OF SURFACE SHAPE   Production Process   APPLICATION & INSTALL ACCESSORIES   Hangzhou FAMOUS Steel Engineering Co.,Ltd. focus on various structural steel construction and steel-related products supplying. FAMOUS received a lot of foreign projects from project engineering, fabrication, logistic and installation guidance etc. and become more professional in foreign project operation, specially in US-EU standard engineering and project management aspects. It owns advanced professional production equipment for the all automation production line of H type that is most advanced at home, pipe truss structure, box-beam production lines, CNC hydraulic punching posterior cutting C type steel, Z type steel production lines, vertical seam 360-degree whip-stitch roof board of hidden button type, weather board production lines and metal sandwich panel production lines, etc.

As for aggressive charges, we believe that you will be searching far and wide for anything that can beat us. We could state with absolute certainty that for such excellent at such costs we've been the lowest around for Factory Free sample China 3G 4G Cellular Single Band Digital Pico ICS Signal Coverage Repeater, The principle of our company is always to offer high-quality solutions, experienced company, and trustworthy communication. Welcome all close friends to place trial buy for creating a long-term business romance. As for aggressive charges, we believe that you will be searching far and wide for anything that can beat us. We could state with absolute certainty that for such excellent at such costs we've been the lowest around for ICFS, Customer satisfaction is our goal. We are looking forward to cooperating with you and providing our best services for you. We warmly welcome you to contact us and please feel free to contact us. Browse our online showroom to see what we can do for you. And then E-mail us your specifications or inquiries today. High Density EPS Sandwich Panels with Water Resistant for Roof and Wall Panels   Polystyrene Core EPS sandwich panel production process adopts the colored steel sheet as surface board, and the core material is the self-extinguishing closed cell polystyrene foam, It is a kind of high strength composted building material, and it was formed in the automated continuous-molding machine, by combining the pressed colored steel sheet with the High Strength Adhesives. It has the characteristics of complete insulation and fire-proof, fast construction , durability, and beautiful appearance, etc.   Expanded polystyrene (EPS) core sandwich panels   Specifications Thickness of color steel sheets 0.3-0.8mm Thickness of EPS/PU core 40-200mm Effective width Wall panel: 950mm 1150mm Roof panel: 950mm 1050mm Length As client’s requirements Materials EPS sandwich panel, Color steel sheets Structure Upper and lower layer: Color steel sheetMiddle: polystyrene foam board or polyurethane foam board Color All colors (standard international color) or customers samples’ color The polystyrene density 8-25kg/m3 Sample Available freely Character Light in weight, heat insulation, water resistant, green and environmental   Features of EPS Sandwich Panel 1. EPS sandwich panel has the following characteristics: light dead weight, high mechanical strength, excellent shearing resistant performance, strong corrosion resistance, high durability, and weather fastness, etc. 2. The sandwich panel has excellent insulating performance: heat insulation, sound insulation, waterproof performance, etc. 3. It is easy to install and can be used many times over. 4. Nowadays, the EPS sandwich panel is widely used for cleaning workshops, industrial factory buildings, office buildings, stadiums, villas, and public buildings, etc.   Advantages: 1. Broad Availability ,wide range of material for your choice 2. Outstanding formality with beautiful appearance with rich color 3. Superior Durability 4. Excellent Cost Effectiveness 5. Light weight , easy to transportation ,easy to install 6. Fireproof , heat preservation ,sound isolation   Applications: 1. Widely used in construction, heat preservation, packaging, frozen, daily necessities, industrial casting, etc. 2. Also be used to display the assembly places, commodity cabinet, signs and toys manufacture. 3. Mainly applies heat preservation 4. Carport, Hotel, House, Office, Sentry Box,Guard House, Shop, Toilet, Villa, Warehouse, Workshop,Plant   DETAILS OF THE PANEL JOINT   SECTIONAL VIEW OF THE PANELS   TYPES OF SURFACE SHAPE   Production Process   APPLICATION & INSTALL ACCESSORIES   Hangzhou FAMOUS Steel Engineering Co.,Ltd. focus on various structural steel construction and steel-related products supplying. FAMOUS received a lot of foreign projects from project engineering, fabrication, logistic and installation guidance etc. and become more professional in foreign project operation, specially in US-EU standard engineering and project management aspects. It owns advanced professional production equipment for the all automation production line of H type that is most advanced at home, pipe truss structure, box-beam production lines, CNC hydraulic punching posterior cutting C type steel, Z type steel production lines, vertical seam 360-degree whip-stitch roof board of hidden button type, weather board production lines and metal sandwich panel production lines, etc.

owing to fantastic assistance, a variety of high quality goods, aggressive rates and efficient delivery, we love a very good popularity among our customers. We are an energetic firm with wide market for ODM Supplier China Focuslaser 3W How to Laser Engrave Aluminum Engraved Glass Frame, The main purpose of our company is always to live a satisfactory memory to many of the customers, and establish a lengthy time period enterprise romantic relationship with prospective buyers and users all over the environment. owing to fantastic assistance, a variety of high quality goods, aggressive rates and efficient delivery, we love a very good popularity among our customers. We are an energetic firm with wide market for China Machinery, Laser Equipment, You can let us know your idea to develop unique design for your own model to prevent too much similar parts in the market! We will provide our best service to satisfy all your needs! You should contact us right away! Aluminum framed unitized curtain wall modular glazed glass facade for office building   Quick Detail: 1. Unitized glass curtain wall for quick installation 2. Aluminum and glass unitized facades 3. insulated and laminated triple glass units 4. Modular glass curtain wall 5. Modular glazed curtain wall   After years’ development, our group has evolved into an integral turn-key contractor for various buildings and construction. So we have capacity in various huge projects design & build based on satisfactory budget control. Welcome clients to make inquiries directly on whatever kind of building engineering or building surrounding materials pricing. Our professional engineering team are always here to offer customized design and price. Our principle is One Trial Order Bring Content Cooperation! Specification: Material: specification: Length 4m or as per customer's requirement Width 1.5m or as per customer’s requirement Height 0.2m or as per customer’s requirement   Unitized glass curtain wall systems are composed of large glass units that are created and glazed within a factory and then sent to the construction site. Once arriving on site, the units can then be hoisted onto anchors connected to the building whatever concrete or steel buildings. High quality, due to tight tolerances of fabrication in a climate-controlled environment, is only one hallmark of this type of system. Because there is no on-site glazing, another major benefit of using a unitized system is the quicker speed of installation. The system can be installed in a third of the time of a stick-built system which means a lot of site time saving. This system is well suited for cases where there is a large volume of prefabricated unitized panels required, where there are higher field labor costs (thereby shifting the labor to a more cost-effective factory work force), where higher performance is needed (for wind loads, air/moisture protection, seismic/blast performance), for taller structures, and more regular conditions for panel optimization.     Only one unit-to-unit splice (usually a silicone sheet or patch) needs to be field-sealed, and only one anchor per mullion needs to be attached to the face or top of the floor slab. Interlocking unitized glass curtain wall frame members are weatherized to seal to one another, both horizontally and vertically. This accommodates thermal expansion and contraction, inter-story differential movement, concrete creep, column foreshortening, and/or seismic movement. Most unitized curtain wall systems are installed in a sequential manner around each floor level, moving from the bottom to the top of the building.   Application   HOW TO CHOOSE FROM STICK and UNITIZED CURTAINWALL SYSTEMS Selection Criteria Stick Curtain wall Unitized Curtain wall Project Size Small Large Wall Configuration Complex (Many changes in plane, e.g. soffits, corners, etc.) Repetitive (Large expanses of flat wall) Joint Pattern Random Uniform horizontal sill line Glazing Field Factory Inter-story Movements Very limited Inter-locking frames accommodate movements Quality Control Subject to site variables (Both environment and equipment) Controlled factory conditions Modification Can be cut-to-fit in the field Pre-engineered Sealing Subject to site variables Minimal field sealing Field Labor Cost High (Many parts to track and assemble) Low Field Labor Duration Slow Fast (Often setting 75 sq-ft or more per unit) Access and Safety Exterior access required Set from the interior (Exterior optional)     Although unitized, pre-glazed curtain wall system is particularly suited to high-rise building construction or projects with large quantities of module repetition or whenever 4-sided sapless system is required; it is also used popularly on any size project that demands it. Whether your project requires a standard or custom framing system, we are capable to design, fabricate and install the glass façade curtain wall as per your needs, by providing a quality product.   All our pre-glazed façade curtain wall systems are fabricated, assembled and glazed within the controlled environment of our manufacturing facility. This will bring greater quality control and the ability to pr-construct our frame modules before the building’s structure is erected; it’s also very helpful to accelerate the close-in of the building, since our installation team can work on sections of the building as they become available; while minimizing delays due to weather conditions.   Nowadays the unitized curtain wall system have become the preferred method for enclosing buildings, as more building owners, architects and contractors conclude the benefits of this type of construction. Unitized systems allow buildings to be enclosed quickly, which can help to speed up the construction process leading to earlier occupation. The fabrication process for unitized systems is more consistent than for stick-built curtain walls, as unitized wall systems are constructed in almost an assembly line fashion, indoors, and under controlled environmental conditions.