Selection of steel structure keel: 1. The span is within 8m: 15H steel for the main beam, #10 channel beam and #63 angle iron for the secondary beam. 2. No embedded parts shall be fixed with expansion bolts. 3. Abundant space can be used upper and lower beam structure, space is not enough can be used plane structure. Steel structure welding requirements: There are must be at least three sides of the welding, the top surface can not be welded. Floor board Installation: 1. Before laying the boards, the welding seam on the top surface must be polished flat and the welding spatter must be cleared away. 2. The longitudinal direction of the boards should be parallel to the main beam. 3. Any edge of the board shall not be suspended. 4. A gap of 3-5mm must be left between the boards. 5. The joint between the boards should be located in the center of the beam. Nailing requirements: 1. Selecting the countersunk head tapping screw, with size of M5*45mm, nailing on the vice-keel (Angle iron). 2. Drill first and then nail, nail hole should be bigger than the diameter of the nail. 3. Nailing starts from the center of the board, and then hits outwards, and finally hits the side nails. 4. The nailing position of the side nail should be about 20mm from the edge of the board. 5. The nail distance is 300-600mm. Treatment of the joint: the joint can be injected with silicone sealant, or mortar can be used. Follow-up processing: 1. Brushing waterproof coating, and then directly use. 2. Laying wood floor 3.Laying ceramic tiles   1. The top and bottom keels are fixed respectively top floor and on floor with expansion bolts. 2. The vertical keel should be aligned well according to the requirement (generally being 612 mm) with laterally supporting keel installed. 3. Cutting the board material to the dimensions needed (about 10mm lower than wall height) 4. Board material is fixed on keel in anchoring seam way with tapping screw: the interval of tapping screw is generally about 200~250mm with screws sinking 0.5mm under the board face. 5. The expansion seam of about 4mm between boards should be kept. 6. The shrouding should be fixed from the middle to the four sides and cannot be operated at multipoint simultaneously to avoid generating inner stress to make board material bucking. Before board being packaged and fixed, depending the needs, glass cotton or rock cotton can be filled.   1. Fiber cement board preparation: according to the size and design requirements, installing the supporting aluminum accessories( six aluminium accessories per sheet) on the back of fiber cement board ( maximum cross section size is 2780 * 1220 mm). Making cross line according to the vertical distance ( 600 mm ) between the transverse keels and length of fiber cement board uniform size, then fixing supporting aluminum fasteners at the intersection,using 10 mm long and 4 mm thick stainless steel screws. 2. Construction wall preparation: cleaning up the wall surface, and then marking out the position lines and partition lines of the steels according to the design drawings and actual needs. 3. Wire hanging: vertical wire hanging should use the ∮1.0-∮1.2 size steel wire, with 8-10 kgs weight lower counterweight iron, and the upper end is hung on the special wire hanging Angle iron frame. The angle iron frames are fixed on the top corners of the wall with expansion bolts, and marking on the top and bottom of the control line. 4. Keel installation: first fixing 50×50×4 angle iron (with adjustable hole) on the structural surface with ∮8 expansion bolt, that horizontal distance between the angle iron and the 50×50×3.5 vertical square steel tube on the angle steel is 800mm. When installing the vertical square steel tube, it must be checked by hanging steel wire from top to bottom to detect its Perpendicularity. After that, installing the fastening angle iron and the transverse aluminum keel (with 600mm spacing). The connection between angle iron, square steel tube and transverse keel is made with ∮10 bolts. Last, using the infrared level meter to detect whether the horizontal aluminum keel is horizontal, and the steel line to detect whether it is vertical. 5. Fiber cement board installation: mounting the advance processing board on the keel according to the design drawings, and using aluminum accessories to connect the panel and keel. Hanging lightly the same level layer fiber cement boards on the keel, and then adjusting the horizontal and vertical degree of board through upper and lower steel wires. After that, checking the boards seam, whose width should be uniform according to the requirements of design. Last, tightening the stainless steel screws (20mm long and 6mm thick) on the complete set of aluminum accessories. 6. Board joint treatment: using the fiber cement board powder mixing glue to fill the seam, and then painting with special coating twice. When filling the gap, it is necessary to pay attention to the uniform and full filling. Thickness(mm) Width(mm) Length(mm) 5-30 1220 2440,3000 Dimensional deviation: Thickness ≤8mm ±0.3mm 8--12mm ±0.5mm ≥12mm ±0.8mm Width ≤1220mm ±3mm >1220mm ±4mm Length ≤2400mm ±5mm >2440mm ±8mm Physical properties: Density 1.2-1.6g/cm3 Thermal conductivity ≤0.29 W/(m.k) Water absorption ≤28% Water contain ≤10% Moisture movement ≤0.25% Bending strength oven dry ≥16 Mpa saturation with water ≥13 Mpa Non-combustibility class A Feature Waterproof,Fireproof,Moieture proof,Sound insulaton,Flexural strength,Easy installation,etc.

Selection of steel structure keel: 1. The span is within 8m: 15H steel for the main beam, #10 channel beam and #63 angle iron for the secondary beam. 2. No embedded parts shall be fixed with expansion bolts. 3. Abundant space can be used upper and lower beam structure, space is not enough can be used plane structure. Steel structure welding requirements: There are must be at least three sides of the welding, the top surface can not be welded. Floor board Installation: 1. Before laying the boards, the welding seam on the top surface must be polished flat and the welding spatter must be cleared away. 2. The longitudinal direction of the boards should be parallel to the main beam. 3. Any edge of the board shall not be suspended. 4. A gap of 3-5mm must be left between the boards. 5. The joint between the boards should be located in the center of the beam. Nailing requirements: 1. Selecting the countersunk head tapping screw, with size of M5*45mm, nailing on the vice-keel (Angle iron). 2. Drill first and then nail, nail hole should be bigger than the diameter of the nail. 3. Nailing starts from the center of the board, and then hits outwards, and finally hits the side nails. 4. The nailing position of the side nail should be about 20mm from the edge of the board. 5. The nail distance is 300-600mm. Treatment of the joint: the joint can be injected with silicone sealant, or mortar can be used. Follow-up processing: 1. Brushing waterproof coating, and then directly use. 2. Laying wood floor 3.Laying ceramic tiles   1. The top and bottom keels are fixed respectively top floor and on floor with expansion bolts. 2. The vertical keel should be aligned well according to the requirement (generally being 612 mm) with laterally supporting keel installed. 3. Cutting the board material to the dimensions needed (about 10mm lower than wall height) 4. Board material is fixed on keel in anchoring seam way with tapping screw: the interval of tapping screw is generally about 200~250mm with screws sinking 0.5mm under the board face. 5. The expansion seam of about 4mm between boards should be kept. 6. The shrouding should be fixed from the middle to the four sides and cannot be operated at multipoint simultaneously to avoid generating inner stress to make board material bucking. Before board being packaged and fixed, depending the needs, glass cotton or rock cotton can be filled.   1. Fiber cement board preparation: according to the size and design requirements, installing the supporting aluminum accessories( six aluminium accessories per sheet) on the back of fiber cement board ( maximum cross section size is 2780 * 1220 mm). Making cross line according to the vertical distance ( 600 mm ) between the transverse keels and length of fiber cement board uniform size, then fixing supporting aluminum fasteners at the intersection,using 10 mm long and 4 mm thick stainless steel screws. 2. Construction wall preparation: cleaning up the wall surface, and then marking out the position lines and partition lines of the steels according to the design drawings and actual needs. 3. Wire hanging: vertical wire hanging should use the ∮1.0-∮1.2 size steel wire, with 8-10 kgs weight lower counterweight iron, and the upper end is hung on the special wire hanging Angle iron frame. The angle iron frames are fixed on the top corners of the wall with expansion bolts, and marking on the top and bottom of the control line. 4. Keel installation: first fixing 50×50×4 angle iron (with adjustable hole) on the structural surface with ∮8 expansion bolt, that horizontal distance between the angle iron and the 50×50×3.5 vertical square steel tube on the angle steel is 800mm. When installing the vertical square steel tube, it must be checked by hanging steel wire from top to bottom to detect its Perpendicularity. After that, installing the fastening angle iron and the transverse aluminum keel (with 600mm spacing). The connection between angle iron, square steel tube and transverse keel is made with ∮10 bolts. Last, using the infrared level meter to detect whether the horizontal aluminum keel is horizontal, and the steel line to detect whether it is vertical. 5. Fiber cement board installation: mounting the advance processing board on the keel according to the design drawings, and using aluminum accessories to connect the panel and keel. Hanging lightly the same level layer fiber cement boards on the keel, and then adjusting the horizontal and vertical degree of board through upper and lower steel wires. After that, checking the boards seam, whose width should be uniform according to the requirements of design. Last, tightening the stainless steel screws (20mm long and 6mm thick) on the complete set of aluminum accessories. 6. Board joint treatment: using the fiber cement board powder mixing glue to fill the seam, and then painting with special coating twice. When filling the gap, it is necessary to pay attention to the uniform and full filling. Thickness(mm) Width(mm) Length(mm) 5-30 1220 2440,3000 Dimensional deviation: Thickness ≤8mm ±0.3mm 8--12mm ±0.5mm ≥12mm ±0.8mm Width ≤1220mm ±3mm >1220mm ±4mm Length ≤2400mm ±5mm >2440mm ±8mm Physical properties: Density 1.2-1.6g/cm3 Thermal conductivity ≤0.29 W/(m.k) Water absorption ≤28% Water contain ≤10% Moisture movement ≤0.25% Bending strength oven dry ≥16 Mpa saturation with water ≥13 Mpa Non-combustibility class A Feature Waterproof,Fireproof,Moieture proof,Sound insulaton,Flexural strength,Easy installation,etc.

Specification Bearing bar( width x thickness) 25x3, 25x4, 25x5, 30x3, 30x4, 30x5, 32x5, 40x5, 50x5, 65x5, 75x6, 75x10 etcI Bar: 25x5x3, 30x5x3, 32x5x3, 40x5x3 etc earing bar pitch 12.5, 15, 20, 23.85, 25, 30, 30.16, 30.3, 32.5, 34.3, 35, 38.1, 40, 41.25, 60 etc Twisted cross bar pitch 38.1, 50, 60, 76, 80, 100, 101.6, 120mm Surface treatment black annealed wire, hot dipped galvanized, powered coated, painting etc Greating style Plain, Smooth, Serrated, teeth, I bar                                 Remarks: other size also can be customized according to customer's request Overview Product Description Material :Mild steel & Low carbon steel, etc. Surface treatment: hot-dipped galvanized, electric galvanized. 1)Bearing bar shapes: plain or serrated or I bar type. 2)Bearing Bar Pitch (center to center): 30, 40, 60mm are recommended,but we can also do it under customer's request. 3)Bearing Bar (Load Bar) Specifications (mm):The specification(thickness of bearing bar)of plain type and serrated type is 20 x 3 to 100 x 10; 4)Cross bar pitch(mm) :38, 40, 50, 60, 76, 80, 100, 110, 120 etc.   Steel grating is a type of rigid grid-like structure made from steel bars or sheets. It consists of parallel, flat steel bars or load-bearing strips that are interconnected with perpendicular bars or crossbars. The resulting pattern creates a series of open spaces or gaps, typically in a square or rectangular grid pattern.   The purpose of steel grating is to provide a durable and versatile surface for various applications. Here are some common uses and purposes of steel grating:   Flooring and Walkways: Steel grating is often used as flooring or walkway material in industrial facilities, commercial buildings, and public spaces. Its open design allows for the passage of air, light, and liquids while providing a slip-resistant surface for pedestrians.   Drainage and Ventilation: The gaps in steel grating allow water, debris, and other substances to pass through, making it suitable for drainage applications. It is commonly used as trench covers, drain covers, and platform gratings to facilitate proper water drainage and ventilation in areas prone to moisture accumulation.   Industrial Platforms and Catwalks: Steel grating provides a sturdy and stable platform for workers in industrial environments such as factories, power plants, and refineries. It can be used to create elevated platforms, catwalks, and mezzanine floors that allow access to machinery, equipment, and maintenance areas.   Safety and Security: The open design of steel grating offers better visibility and reduces the accumulation of hazardous materials such as oil, grease, or snow. It is commonly used in areas where safety and security are crucial, such as airports, railway stations, pedestrian bridges, and military installations.   Stair Treads and Ramps: Steel grating can be fabricated to create stair treads and ramps, providing a non-slip surface for safe vertical and inclined access. It is often used in industrial settings, outdoor structures, and public buildings where stairs and ramps require enhanced grip and durability.   Shelving and Storage: Steel grating can be used as a material for shelving or storage racks in warehouses, distribution centers, and retail stores. Its open design allows for better visibility, airflow, and drainage, making it suitable for storing items that may require ventilation or spillage management.   Overall, steel grating is valued for its strength, durability, corrosion resistance, and versatility. It finds applications in a wide range of industries and sectors due to its ability to provide a robust and functional surface while allowing for the passage of air, light, and fluids.  

Specification Bearing bar( width x thickness) 25x3, 25x4, 25x5, 30x3, 30x4, 30x5, 32x5, 40x5, 50x5, 65x5, 75x6, 75x10 etcI Bar: 25x5x3, 30x5x3, 32x5x3, 40x5x3 etc earing bar pitch 12.5, 15, 20, 23.85, 25, 30, 30.16, 30.3, 32.5, 34.3, 35, 38.1, 40, 41.25, 60 etc Twisted cross bar pitch 38.1, 50, 60, 76, 80, 100, 101.6, 120mm Surface treatment black annealed wire, hot dipped galvanized, powered coated, painting etc Greating style Plain, Smooth, Serrated, teeth, I bar                                 Remarks: other size also can be customized according to customer's request Overview Product Description Material :Mild steel & Low carbon steel, etc. Surface treatment: hot-dipped galvanized, electric galvanized. 1)Bearing bar shapes: plain or serrated or I bar type. 2)Bearing Bar Pitch (center to center): 30, 40, 60mm are recommended,but we can also do it under customer's request. 3)Bearing Bar (Load Bar) Specifications (mm):The specification(thickness of bearing bar)of plain type and serrated type is 20 x 3 to 100 x 10; 4)Cross bar pitch(mm) :38, 40, 50, 60, 76, 80, 100, 110, 120 etc. Steel grating is a type of rigid grid-like structure made from steel bars or sheets. It consists of parallel, flat steel bars or load-bearing strips that are interconnected with perpendicular bars or crossbars. The resulting pattern creates a series of open spaces or gaps, typically in a square or rectangular grid pattern.   The purpose of steel grating is to provide a durable and versatile surface for various applications. Here are some common uses and purposes of steel grating:   Flooring and Walkways: Steel grating is often used as flooring or walkway material in industrial facilities, commercial buildings, and public spaces. Its open design allows for the passage of air, light, and liquids while providing a slip-resistant surface for pedestrians.   Drainage and Ventilation: The gaps in steel grating allow water, debris, and other substances to pass through, making it suitable for drainage applications. It is commonly used as trench covers, drain covers, and platform gratings to facilitate proper water drainage and ventilation in areas prone to moisture accumulation.   Industrial Platforms and Catwalks: Steel grating provides a sturdy and stable platform for workers in industrial environments such as factories, power plants, and refineries. It can be used to create elevated platforms, catwalks, and mezzanine floors that allow access to machinery, equipment, and maintenance areas.   Safety and Security: The open design of steel grating offers better visibility and reduces the accumulation of hazardous materials such as oil, grease, or snow. It is commonly used in areas where safety and security are crucial, such as airports, railway stations, pedestrian bridges, and military installations.   Stair Treads and Ramps: Steel grating can be fabricated to create stair treads and ramps, providing a non-slip surface for safe vertical and inclined access. It is often used in industrial settings, outdoor structures, and public buildings where stairs and ramps require enhanced grip and durability.   Shelving and Storage: Steel grating can be used as a material for shelving or storage racks in warehouses, distribution centers, and retail stores. Its open design allows for better visibility, airflow, and drainage, making it suitable for storing items that may require ventilation or spillage management.   Overall, steel grating is valued for its strength, durability, corrosion resistance, and versatility. It finds applications in a wide range of industries and sectors due to its ability to provide a robust and functional surface while allowing for the passage of air, light, and fluids.  

Product Description • What is WPC? WPC stands for Wood Plastic Composite. It is a type of material made from a combination of wood fibers or sawdust and plastic. The resulting material is durable, resistant to moisture, and requires minimal maintenance. WPC decking, in particular, refers to outdoor decking made from WPC material, which is often used as an alternative to traditional wood decking due to its superior durability and weather resistance. •   Details of the outdoor WPC decking Name Wood plastic composite (WPC) decking Size 25*140 Length 2.2m, 2.9m, 5.8m/ Customized Material Wood & plastic composite Color Red, brown, yellow, black, coffee, etc Surface Sanded, brushed Package PE film +Wood Pallet MOQ 200 square meters Certificates CE, BSCI, ISO9001, ISO14001     • Application 1.Building and construction: WPC is widely used in building and construction for decking, railing, fencing, wall cladding, and other outdoor applications. WPC is preferred over traditional wood products as it is more durable, resistant to moisture, and requires less maintenance. 2.Automotive industry: WPC is used in the automotive industry to manufacture interior and exterior parts such as door panels, trims, and dashboards. WPC is preferred due to its low weight, high strength, and ability to resist heat and moisture. 3.Furniture industry: WPC is used in the furniture industry to manufacture outdoor furniture, garden furniture, and other types of furniture. WPC is preferred due to its durability, weather resistance, and low maintenance. 4.Packaging industry: WPC is used in the packaging industry to manufacture pallets, crates, and other types of packaging materials. WPC is preferred due to its high strength, durability, and resistance to moisture and decay. 5.Consumer goods: WPC is used to manufacture a wide range of consumer goods such as toys, sporting goods, and household items. WPC is preferred due to its low cost, versatility, and ability to be molded into different shapes and sizes.  

Details of the outdoor WPC decking Name Wood plastic composite (WPC) decking Size 25*140 Length 2.2m, 2.9m, 5.8m/ Customized Material Wood & plastic composite Color Red, brown, yellow, black, coffee, etc Surface Sanded, brushed Package PE film +Wood Pallet MOQ 200 square meters Certificates CE, BSCI, ISO9001, ISO14001 • Application 1.Building and construction: WPC is widely used in building and construction for decking, railing, fencing, wall cladding, and other outdoor applications. WPC is preferred over traditional wood products as it is more durable, resistant to moisture, and requires less maintenance. 2.Automotive industry: WPC is used in the automotive industry to manufacture interior and exterior parts such as door panels, trims, and dashboards. WPC is preferred due to its low weight, high strength, and ability to resist heat and moisture. 3.Furniture industry: WPC is used in the furniture industry to manufacture outdoor furniture, garden furniture, and other types of furniture. WPC is preferred due to its durability, weather resistance, and low maintenance. 4.Packaging industry: WPC is used in the packaging industry to manufacture pallets, crates, and other types of packaging materials. WPC is preferred due to its high strength, durability, and resistance to moisture and decay. 5.Consumer goods: WPC is used to manufacture a wide range of consumer goods such as toys, sporting goods, and household items. WPC is preferred due to its low cost, versatility, and ability to be molded into different shapes and sizes.

Sandwich Panel Here you can find different sandwich panel PU sandwich panel, PIR sandwich panel,EPS sandwich panel, Glass wool panel, Rock wool panel, clean room panel, PU sealed glass wool panel, PU sealed rock wool sandwich panel. Effective width 400~1000 mm Panel thickness 30, 35, 40, 50, 60, 75,100, 150, 200 mm Surface sheets PPGI/ PPGL/ Aluminum sheets/ Al-Mg-Mn alloy metal sheets/ Stainless steel/ Aluminum foils/ PVC sheet Steel thickness 0.40 - 0.75 mm  Aluminum sheets/ Al-Mg-Mn alloy metal sheets 0.70 - 1.20 mm Stainless steel 0.40 - 0.60 mm Regular panel color White grey, Sea blue, Sliver grey, Dk grey, Iron grey Coating type choice PE/ PVDF/ HDP/ SMP, etc. Available length 20FT container:  ≤ 5.95m 40FT container: ≤ 11.95m Product advantages: 1) Heat insulation 2) Durable-more than 30 years 3) Good quality- ISO 9001:2000 4) Waterproof and fireproof 5) Light weight 6) Cost-saving-the lowest price of sandwich panel 7) Environment protection- highly recommend by the government 8) Large span and most area saving

Function Waterproof, fireproof, rot proof, slip resistant, UV resistant,insect Application Backyard, balcony, hallway, garden, farm, swimming pool   WPC Material 60% wood fiber/bamboo 30% plastic (Grade A HDPE) 5% additives     Certificates CE, SGS, ISO9001     Surface Treatment Sanding, brushing, wood grain, mix color, smooth     Advantages 1, longer service life(more than 12 years and 10 year quality guarantee) 2, Waterproof, Antiseptic, Slip resistant (wet & dry) 3, No crack/disruption/warp, No wood thorns hurt, No worm-eaten 4, Maintenance free, no need to paint, carry color itself 5, Same look and feel like real wood, but behave much better 6, Slight water absorption, good dimensional stability, very little expansion/contraction 7, 100% Recycled, friendly to the environment 8, Cuts/fastens/nail/paint easily, easy installing   Product Description • What is WPC? WPC stands for Wood Plastic Composite. It is a type of material made from a combination of wood fibers or sawdust and plastic. The resulting material is durable, resistant to moisture, and requires minimal maintenance. WPC decking, in particular, refers to outdoor decking made from WPC material, which is often used as an alternative to traditional wood decking due to its superior durability and weather resistance. •   Details of the outdoor WPC decking Name Wood plastic composite (WPC) decking Size 25*140 Length 2.2m, 2.9m, 5.8m/ Customized Material Wood & plastic composite Color Red, brown, yellow, black, coffee, etc Surface Sanded, brushed Package PE film +Wood Pallet MOQ 200 square meters Certificates CE, BSCI, ISO9001, ISO14001     • Application 1.Building and construction: WPC is widely used in building and construction for decking, railing, fencing, wall cladding, and other outdoor applications. WPC is preferred over traditional wood products as it is more durable, resistant to moisture, and requires less maintenance. 2.Automotive industry: WPC is used in the automotive industry to manufacture interior and exterior parts such as door panels, trims, and dashboards. WPC is preferred due to its low weight, high strength, and ability to resist heat and moisture. 3.Furniture industry: WPC is used in the furniture industry to manufacture outdoor furniture, garden furniture, and other types of furniture. WPC is preferred due to its durability, weather resistance, and low maintenance. 4.Packaging industry: WPC is used in the packaging industry to manufacture pallets, crates, and other types of packaging materials. WPC is preferred due to its high strength, durability, and resistance to moisture and decay. 5.Consumer goods: WPC is used to manufacture a wide range of consumer goods such as toys, sporting goods, and household items. WPC is preferred due to its low cost, versatility, and ability to be molded into different shapes and sizes.

wpc decorative wall cladding Material Wood Plastic Composite Warranty More than five years. Environmental Protection 95% recycled materials, produced of recycle wood fiber and recycle plastic, and saving forest resources. Good appearance & nice touch Natural feel & wood touch / Broad range of finishes and appearance, Multi-colors, and needn't to painting. Install & Maintain easily Easy to install with low labor cost. The cutting and drilling as do with normal timber, hidden clips and screw fixable. Competitive Price Using most advanced machinery to increase the output and reduce the costs.Strong technical support from famous institute of high polymer to guarantee the best quality as well as cost saving. Features Fire retardant, waterproof, UV resistant, fade resistant, anti-slip, anti-scratch size & color Can be customized Advantages Of Our Wood The wood plastic composite profiles are ideal in many applications traditionally. Using PLASTIC of also many other products can benefit from the following attributes: * Dimensional stability,longevity,natural feel * Resistance to rot and crack * Moisture resistant,low flame spread * High impact resistant * Outstanding screw and nail retention * Environmental friendly, recyclable * Broad range of finishes and appearance * Easily produced and easily fabricated * Contains no toxic chemicals or preservatives wpc wall panel is mainly a kind of wall decorative panel made of wood plastic material. 1. The product has the advantages of aging resistance, UV resistance, acid and alkali resistance, insect resistance, antibacterial and antibacterial, etc. 2. Contains unique wood fiber, cured by polymer, has good physical and mechanical properties such as pressure resistance, impact resistance and good reprocess ability. 3. The product is oil-resistant, stain-resistant, easy to clean, the service life of more than 30 years, the product is formaldehyde-free, suitable for human living environment, recyclable, green and environmental protection. Wpc wall panel is widely used in home decoration, hotel, engineering and many other aspects. The main raw material in the market is wood plastic, but the process is different.  

Product Parameters Brand Name FASECBuildings Core Material ECO Wood Plastic Composite Surface Gold/ Black Walnut/ Cedar/ Teak/ Classic Gray/ Customized Type 105Wall/ 159Wall /175Wall/ 192Wall/ 100x25Ceiling/ 55x60Ceiling/ 40x100Ceiling/ 25x80Ceiling / 70Decking/ 140Decking Advantage Waterproof / Fireproof / ECO Friendly Package 8pcs/carton Weight 35kg/carton Certificate ISO9001 Installation Keels & Screws Application Home / Office / School / Commercial Building/ Hotel *Other dimensions can be customized according to clients` requirements, the construction according to demand when the random cutting.   Product Features 1. Natural wood patterns. 2. ECO friendly, high recyclable green material. 3. No cracking, warping and splitting. 4. Moisture proof, waterproof and corrosion resistance. 5. Low maintenance and no painting. 6. Easy to install and clean. 7. Weather resistance and suitable from -40ºC to 60ºC. 8. High degree of UV and color stability. Application With excellent quality, reasonable price and good service, FASEC Buildings ECO wood plastic composite cladding wall panels are extensively used in building material and other industries. Such as home, hotel, school, studio room, reception area, lecture theater, office, hospital, sport and recreation hall, workshop and commercial building.

Products Description Product Name 1220*2440 2.0 2.2 2.5 3.0mm waterproof uv pvc foam board scratch resistant UV marble board Material PVC,Calcium power and Additive Composition PVC baseboard,waterproof layer,hot stamping film and UV paint Thickness commonly 3.0mm,  2.0-5.0mm thickness as required Width 1220MM Length 2-3meters/pc as usually Surface Color Marble,wood grain,solid color, 3D printing, both matt and high gloss MOQ 50 pcs/color Feature Eco-friendly,fire retardant,waterproof,easy to install and long service time Application interior wall decoration both for commercial and private places, such as hotel,restaurant,supermarket,kitchen,living room etc. Advantages of UV board The surface of the UV decorative board is generally made of solvent-free environmentally friendly paint, which forms a dense protective film under the drying of UV light to prevent the release of residual harmful gases on the substrate, thereby improving the protection index of the UV board. 2. After the UV light is fixed, a very smooth protective film will be formed on the surface of the UV decorative board, which is the reflection of the specular highlight and is more beautiful. Therefore, the decorative effect is excellent, and the decorative board after light fixing has high hardness and good wear resistance. 3. The UV decorative board also performed very well in the experimental test. After light curing, the protective film on the surface is resistant to acid and alkali corrosion, and it remains unchanged during long-term use and has a long service life. It is also officially processed by the special custom process of light solid, which makes the physical properties of the UV decorative board more stable, does not fade for a long time, and can be bright for a long time, so the decorative effect is better. 4. Compared with stone, UV decorative board has its advantages, its texture is natural, but its performance can surpass natural stone. UV decorative board has crystal clear stone surface and texture, highly frosted, noble but not luxurious. ApplicationInstall on wall Home improvement, hotels, KTV, office areas, shopping malls and other wall, ceiling, image wall decoralion   Bath, bathroom, kitchen and other regional decorations   A public health area, such as a nursing home or hospital   Strong and shockproof packages. can be directly loaded into the container, or packed by plywood pallets Packing 3mm thickness as example, 100pcs/pallet Delivery usually 7-10 workdays, large according to exact quantity  

Features &Usage Features of eps sandwich wall panel Energy-saving---heat resistance and thermal insulation 2. Light weight---1/6 of traditional brick 3. environment-friendly ---100% not asbestos 4. Area-saving --- save 4 m² / 100 m² (compare with tradition building materials) 5. Waterproof and damp proof ---see photos below 6. Fire-proof --- 4 hours 1000 degree without damage; GB/T9987 7. Sound-insulation ---38dB for 60mm, 46dB for 150mm 8. Best hanging force---single point hanging strength: 50kgs, embeded can up to 150kgs 9. Anti-seismic and impact resistance--- anti-earthquake class 7 10. Heat Insulation and preservation---temperature differences between indoor and outdoor 5 ℃ 11. Thermal insulation 12. Fast/easy construction, Low Labor: two experienced workers 50-80 square meters/day 13. Long life usage: 70 years Specification   Product            Name   Specification (mm)   Weight (kg/m2) Packing (pcs/m2 per 20GP)   Application     Famous light weight energy-saving Compound sandwich panels 2270x610x60 45~48 315pcs/436m2 Roof 2270x610x75 50~53 252pcs/349m2 Interior wall 2270x610x90 55~58 207pcs/287m2 Interior/Exterior wall 2270x610x100 60~65 189pcs/262m2 Interior/Exterior wall 2270x610x120 65~75 153pcs/212m2 Exterior wall 2270x610x150 80~90 126pcs/175m2 Exterior wall Allowed Tolerance: Length±5mm; Width±2mm; Thickness±1mm; Diagonal±2mm About our service 1. Free sample and catalogue can be provided. 2. Quotation, all information related about our eps sandwich wall panels. 3. Arranging production. 4. Packing and shipping. 5. Sending you necessary documents for your customs clearance. 6. Providing all necessary information and technical support for installation. 7. Engineer is available to go abroad to train your workers. How about quality control? We monitor every producing procedure, and we will check the quality before packing and shipping. and we pass ISO 9001 quality control system. Do you only supply eps sandwich panels? FASEC building material Products: 1. Sandwich panel 2. Sandwich panel making machine 3. flexible soft ceramic tiles 4. soft ceramic tiles making machine